Jump to content
HybridZ

Weighed my LT1 T56 and got a 0-60 time


Recommended Posts

Using a four corner race scale, my 73, full interior with LT1 T56, 1/2 tank of gas and no driver weighed in at

 

2604 lb

 

Front

647 - 655 = 1302

622 - 680 = 1302 = 50/50 weight split :-)

 

With me in it, and I weight 176 lb, so these numbers look accurate

Front

705 - 625

701 - 725

 

I also have a quafe LSD which helps unbelievably to get the power down and so I measured my 0-60 with a Gtech accelerometer at between 4.6 and 4.8 seconds, I need to get to a track to verify that, but Car and driver support the idea that the Gtech is fairly accurate.

 

I calculated the expected time, and depending on the tool it was

0-60 mph: 4.22 seconds http://www.060calculator.com/

 

0-60 mph: 4.64 http://www.cartestsoftware.com/

 

So all in all I am really pleased, :-) so thank you all for the information on hybrid Z, or it would probably never have got this far!

 

Mike

Link to comment
Share on other sites

I reall need to weigh my car again but going down to Daytona my car was 2980. We used a truck stop scale for $9...lol. I am about 205lbs and I had clothes, small jack, tools, gas tank full and extra crap for the road trip. I am thinking my car weighs near the 2400 without me in it. Your numbers look really good.

Link to comment
Share on other sites

Even with all the numbers lining up with calculations, I won't believe it until I have a time slip, thats the ultimate proof.

But further corroboration is that the same gtech was run 8 times in an Mitsu Evo, and comparing the data, the evo launches harder as you might expect, but then gets comfortably reeled in on each run.

 

Mike

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...