DavyZ Posted December 29, 2002 Share Posted December 29, 2002 Len, the endlinks look the same from what I could see when we did Auxilary's sway bar swap. I'll look for the end links to that bar--I do have them someplace around here, but I do think the stock ones can be used for now. Davy Quote Link to comment Share on other sites More sharing options...
fl327 Posted December 29, 2002 Author Share Posted December 29, 2002 cool, ill probably replace the top bushings with the poly i have from this one endlink i found at the jy, then if you can find them ill replace the bottom part, hey works right? Quote Link to comment Share on other sites More sharing options...
fl327 Posted December 29, 2002 Author Share Posted December 29, 2002 hey all, want to put a 1" sway bar in my car i got from davy z, thanx davy z ! have the mounts and bushings but no endlinks, i was wondering if i could reuse my old endlinks, i have some poly endlink bushings laying around and some hardened washers i could use as well, wondering if the bore is bigger on a bigger sway bar requiring a thicker endlink, i would think they were the same because of the hole in the control arm where it goes into is pretty small. i hope it works, but want to know if someone knows for sure because i dont want to pull the bar down and find out i cant put the fat one in. thanx guys Quote Link to comment Share on other sites More sharing options...
auxilary Posted January 1, 2003 Share Posted January 1, 2003 i think for 20 bucks you can get a set of new endlinks for msa or energy suspension. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.