Guest Anonymous Posted February 8, 2003 Share Posted February 8, 2003 Par on the left is NAPA's best or so they said, $59. Did not like the fact that the part had no grease fitting and it has a nylock nut and not the castle nut with the cotter pin. Part on the right is a Beck Arnley part, $49. Both from NAPA. I think Beck Arnley is just a distributor and doesn't really make anything. I had the same issue with tie rod ends. Be careful what you put on your car. Mark Quote Link to comment Share on other sites More sharing options...
fl327 Posted February 8, 2003 Share Posted February 8, 2003 ive used both kinds, and they hold up just fine, i too was a bit bummed uot when i found out that it didnt have a castlenut, same with some brands of tie rods, which i wasnt excited about, but they still held up fine, personal preference is to use MOOG componenets, they not only come with castlenuts, but they give you every mounting bolt brand new, and high grade, very good parts, but then again-i bought a set of moog tierods and they flash rusted the first week i had them on (with the car parked inside!) and one of the didnt have the taper on the threads and i couldnt get it seat right, which made me have to return it, which made me pretty upset because i was ready to bolt em up and start cruising! be careful guys. Quote Link to comment Share on other sites More sharing options...
Guest Drewz Posted February 8, 2003 Share Posted February 8, 2003 Beck Arnley does more import stuff so I prefer them to UAP Napa or North American made parts. Except for brake rotors I prefer Raybestos. Quote Link to comment Share on other sites More sharing options...
Synlubes Posted February 8, 2003 Share Posted February 8, 2003 Stuff like this, I tend to bite the bullet and pay the price for Nissan parts. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.