Peternell Posted March 22, 2008 Share Posted March 22, 2008 I've got to sell this set of SBC Aftermarket heads to finance a set of headers for my 260Z 400 small block project, but I want to cleanly identify what I've got. Here's what I know: 2.02/1.60" new valves, fresh valve job, cast for screw in studs & guideplates. Here's what I think I know: Produced in the early to mid 90's; 64cc chambers, World Products or Dart heads. I've tried looking at numerous Ebay adds to identify a match but I' haven't found a match & I'm concerned that repeating information in an Ebay ad could just be a continuation of misinformation, so I'm asking the pro's here at HybridZ. What have I got? Hopefully not the SR Torkers. What might they be worth? Quote Link to comment Share on other sites More sharing options...
dr_hunt Posted March 22, 2008 Share Posted March 22, 2008 Those are without a doubt world products sportsman II's. The W in the casting is World products trademark casting. Those appear to be angle plug 200 cc versions. There is a date code on them as well to tell you when they were made, which is 1991, that's what the '91 stands for. Worth, not all that much about $300 to $400. There are much better iron heads on the market so they don't bring much anymore IMO. Quote Link to comment Share on other sites More sharing options...
Peternell Posted March 22, 2008 Author Share Posted March 22, 2008 Dr Hunt, Thank You! I'm not gonna get hurt on the deal even at $300, just need to turn them into some cash. Also I've already got a PM about the 461X heads in the background . Between those two sets of heads I should have some cash to play with. Thanks again. Larry Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.