Trys_Hard Posted April 30, 2008 Share Posted April 30, 2008 First time working with MSII. Car L28 Stock with headers and MSA Stage I CAM and 60mm TB. If anyone has a working msq, I would appreciate a screen print of the setup. Or a copy of your msq. Art Quote Link to comment Share on other sites More sharing options...
dexter72 Posted May 2, 2008 Share Posted May 2, 2008 On the top of this page is the megasquirt map sharing sticky. There are atleast 3 different fuel only maps in it. So check those out, maybe one will be what your looking for. Quote Link to comment Share on other sites More sharing options...
Trys_Hard Posted May 2, 2008 Author Share Posted May 2, 2008 I looked at those and they helped but only one was MSII and the engine was different. Art Quote Link to comment Share on other sites More sharing options...
Tony D Posted May 2, 2008 Share Posted May 2, 2008 The LeMons car used the 8X8 map from above. Instead of using the MSQ, take a look at the maps, and simply enter the values into your Megasquirt. It may not be a downloadable 'plug and play' but you can populate the maps really quickly, and even if the engine is not the 'same' there is great lattitude in the tuning...it will run, you just may need to run some tuning runs to clean it up where the peak torque area changed. Above there and below there, there is WIDE lattitude in the tuning and what will run. Quote Link to comment Share on other sites More sharing options...
mpcapps Posted May 12, 2008 Share Posted May 12, 2008 I'm running basically the same setup except no 60mm TB and I have flat top pistons. If you're not satisfied with any of the other maps out there, let me know and i'll give you mine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.