bumble zee Posted May 14, 2008 Share Posted May 14, 2008 Converted my brothers 88 300zx from an auto to a manual, also deleted the emissions stuff as well since there is no smog testing here. Well we put the engine back in, hooked it all up and we got it to fire and run once, but died after about 30 seconds. Now it wont fire at all. Read the codes on the eccs, water temp sensor, and speed sensor. Water temp it pugged in, so not sure what is going on with that. Speed sensor, not sure there either. I also get both lights blinking at the same time 3, 4, and 5 times, dont know what that means. I also noticed that the injectors have power when the car is off, and even with the eccs unplugged. Is that normal? Quote Link to comment Share on other sites More sharing options...
roger.svoboda Posted May 17, 2008 Share Posted May 17, 2008 did you get rid of the safety interlocks associated with the slushbox? If all you did is swap a tranny shouldn't be any thing else interfering with the engine running. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.