73DatsunZ Posted May 21, 2008 Share Posted May 21, 2008 I am getting close to removing my LS1 from our GTO and putting it on a pallet until I am ready for it to be put into my Z, and I have a quick noobie question. Are these the holes that I am supposed to bolt into to pull the engine from the car? Front left side of engine Back right side Quote Link to comment Share on other sites More sharing options...
m1noel Posted May 21, 2008 Share Posted May 21, 2008 My engine had lifting eyes on it out of the factory. They are bolted left front and right rear and uitlize one head bolt and at least one or two other bolts on the engine. I don't know that I would just use one bolt in an aluminum head. Mike Quote Link to comment Share on other sites More sharing options...
rwwisnesky Posted May 21, 2008 Share Posted May 21, 2008 I agree, this is what I did, may not be perfect, but it worked. I ran a chain across to both heads in the front and rear, and then picked it up in the middle. It gave me four monting bolts to distribute the weight. In addition, I used ratcheting strape to the tail of the T56 to level it front to rear and adjust angel to clear frame. I have pictures if you want them. Send me your e-mail as I cant attach them to this reply, I dont think. Quote Link to comment Share on other sites More sharing options...
73DatsunZ Posted May 21, 2008 Author Share Posted May 21, 2008 rwwisnesky, If you would e-mail those pictures that would be great. Pm sent. Quote Link to comment Share on other sites More sharing options...
rwwisnesky Posted May 21, 2008 Share Posted May 21, 2008 Sent you a PM Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.