Mikey Posted May 30, 2008 Share Posted May 30, 2008 Ok so i recently switched out my old egr l28 manifold and swaped it for a l26 manifold. after trying to hook up the linkage i find that i cant get a full range of throttle. if i adjust it to idle it wont open up at wide open throttle. as pictured at rest Then at WOT the primary's are only open about 3/4 of the way and the secondaries are only 1/4 open. So where is my problem? do i need to adjust rod lengths? Im lost and not sure what to do. Any help is appreciated. thanks Quote Link to comment Share on other sites More sharing options...
jeffer949 Posted May 30, 2008 Share Posted May 30, 2008 have you adjusted the throttle stop that is behind the throttle peddle to allow it to move farther? Quote Link to comment Share on other sites More sharing options...
Mikey Posted May 30, 2008 Author Share Posted May 30, 2008 yes, if i do the linkage flips over. Quote Link to comment Share on other sites More sharing options...
Mikey Posted May 31, 2008 Author Share Posted May 31, 2008 ok well the top linkage needed to be moved down one rung witch gave it more multiplied travel. now ive got a dead ignition box. faux. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.