panachedk Posted June 23, 2008 Share Posted June 23, 2008 Alright, i know i can use an lsd that would be for the shortnose r200 in my longnose r200. so i would assume i can take my kaaz two way out of my 240sx and put it in my 280z with no issue and then put the open diff into my 240sx? i know the lsd is interchangeable, however are there any subtle differences that might limit me putting the open diff into my 240sx? Quote Link to comment Share on other sites More sharing options...
naviathan Posted June 23, 2008 Share Posted June 23, 2008 Doubtful. Quote Link to comment Share on other sites More sharing options...
panachedk Posted June 23, 2008 Author Share Posted June 23, 2008 whats doubtful? that it can be done or that there are any issues. Quote Link to comment Share on other sites More sharing options...
NZeder Posted June 23, 2008 Share Posted June 23, 2008 I guess he means it is doubtful based on the unknown (you did not state) if the 1/2 shafts for the LSD are the same spline as the open units ie 29 spline etc. Or if the LSD is a VLSD or CLSD etc. So the centres should swap over it is just a question of alxes/1/2 shafts. Quote Link to comment Share on other sites More sharing options...
panachedk Posted June 24, 2008 Author Share Posted June 24, 2008 the 240 was an open shortnose r200, the 280 was the stock open. i put a kaaz in the 240 a while ago and am wanting to put it back to stock for club racing. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.