big-phil Posted August 22, 2008 Share Posted August 22, 2008 right now I followed this. With my 3 dwell settings http://www.msextra.com/manuals/MS_Extra_Ignition_Hardware_Manual.htm#singlecoil With a MSD 6a I need to set the dwell to a fixed 50% right? like this: http://www.msextra.com/manuals/MS_Extra_Ignition_Hardware_Manual.htm#msdout I thought I saw an msd wire gide but I searched and can't find it. so this was all I could find. Quote Link to comment Share on other sites More sharing options...
mobythevan Posted August 22, 2008 Share Posted August 22, 2008 Give me two minutes and I am going to sticky the MSD wiring picture and the link to the original thread. EDIT: the MSD wiring info is stickied, but it doesn't look like it talks about dwell, so you might want to add your findings there when everything works. Quote Link to comment Share on other sites More sharing options...
big-phil Posted August 22, 2008 Author Share Posted August 22, 2008 Give me two minutes and I am going to sticky the MSD wiring picture and the link to the original thread. EDIT: the MSD wiring info is stickied, but it doesn't look like it talks about dwell, so you might want to add your findings there when everything works. ok, I set the dwell to fixed 50% and started the car. Let me mount everything then take it for a drive to be sure. Quote Link to comment Share on other sites More sharing options...
big-phil Posted August 22, 2008 Author Share Posted August 22, 2008 also just hooked up the MSD tach adaptor pn 8920 and my 78 280z tach works!! this is the link to hooking up that: http://www.msdpowersports.com/pdf/frm22049_pn8920.pdf still need to mount and drive:icon30: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.