scarriker Posted January 29, 2009 Share Posted January 29, 2009 My 77 280 is missing and dieing like a bad vacume or air mixture problem. I did an ohms check on the mass airflow unit and it shows high ohms at about 65 ohms. I have a 1983 non turbo zx could I install this mass airfow and find out for sure if it is defective? Scott Quote Link to comment Share on other sites More sharing options...
Brad-ManQ45 Posted January 29, 2009 Share Posted January 29, 2009 Have you bothered to download the FSM for the ZX to determine the valid range of values for the signal from the AFM? If not, go to carfiche.com, download the manual and do your troubleshooting... Quote Link to comment Share on other sites More sharing options...
scarriker Posted January 31, 2009 Author Share Posted January 31, 2009 Have you bothered to download the FSM for the ZX to determine the valid range of values for the signal from the AFM? If not, go to carfiche.com, download the manual and do your troubleshooting... I will do this but i am troubleshooting the 77 Z Quote Link to comment Share on other sites More sharing options...
scarriker Posted January 31, 2009 Author Share Posted January 31, 2009 That is a good idea. Missujnderstood your post at first. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.