Guest aaryus Posted February 16, 2009 Share Posted February 16, 2009 I'm looking for either a picture, diagram, or just detailed instructions on what the wiring is supposed to look like on the back of the alternator. it's a rebuilt 83 alternator, and when taking the old one out I naively failed to mark which wires go where. Any help would be great, I just wanna get her on the road again. Thanks! Quote Link to comment Share on other sites More sharing options...
RigilKent Posted February 16, 2009 Share Posted February 16, 2009 I can post pics of the manual page in a few days but you should get a response sooner Quote Link to comment Share on other sites More sharing options...
dave280zx Posted February 17, 2009 Share Posted February 17, 2009 Here's a pic from mine that I stole from an old post of mine. Its a 79, so I dont know how much that will help. Hope this works: http://forums.hybridz.org/attachment.php?attachmentid=4600&d=1198453235 (Copy and paste I guess?) Quote Link to comment Share on other sites More sharing options...
misterZ Posted February 24, 2009 Share Posted February 24, 2009 If it helps, my stock Alt went out so I swapped a new `82 ZX Alt from Autozone following the steps here: http://www.atlanticz.ca/zclub/techtips/alternatorswap/index.html For Z owners: It's nice to see the needle not fluctuate and lights dimming... ah, those were the days. After I made the electrical jumpers I covered everything in wire loom and blended it in w/ the (loose) VR plug... I have a dash placard from `95 Atlanta Zfest covering my VR that diverts attention so I left it in, disconnected of course--not like anyone would know the difference. mister Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.