robrsx Posted May 17, 2009 Share Posted May 17, 2009 Hey guys I am very new at this but I would like to get some quick opinions from you guys if you don't mind. I did do a search but these questions I could not find. I have a fully rebuilt L28 with an N42 block and an N42 head and an ECU off of a 1980 280zx non turbo. The motor was bored over a bit and new pistons were used, everything on the head and block was pretty much worked on and got the full treatment. I wanted to do a turbo with this set up but a few questions remain. 1. Can or will the combo I have work for a turbo to get up close to around 300hp or 350hp with no problems to the motor. 2. Will the ECU work for this or do I need to get a ECU from a turbo zxt? Any one that can chime in would be greatly appreciated. I could probably find the rest on my own but those are the 2 important questions so far before I get this started. Thanks in advanced. Quote Link to comment Share on other sites More sharing options...
ben280zx Posted May 17, 2009 Share Posted May 17, 2009 Welcome, But you haven't search much and if you did, you didn't read the whole thread. I'll point you to one. http://forums.hybridz.org/showthread.php?t=84860&highlight=turbo+conversion http://forums.hybridz.org/showthread.php?t=127833&highlight=turbo+conversion Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.