Fusible Link Upgrades Will this work?

[beebeecivic]

Alright I have seen Pallnet and Atlantic Z's Fusible Link upgrades but i was wondering if this will work

 

http://www.amazon.com/Stinger-Gauge-Fused-Distribution-Block/dp/B001IQIW7I/ref=sr_1_9?ie=UTF8&s=electronics&qid=1246072869&sr=1-9

 

I understand that there Stinger S4HDMAX is one that works , but i jus want to be open to more options. Thanks!

[zfreak77]

yep, That will work. If you dont wont to order it you could just go to your local car audio shop and buy one. It may even be cheaper. I bought one from a local shop named nortons car audio thats almost the excact same thing. Just buy the block, you don't need the fancy gold colored allen wrench that comes with some of the others and that they charge ten dollars more for. Buy they fuses from autozone or advanced and a battery cable and youv'e spent 43 dollars and some change. Good luck with the upgrade, Its simple.

[beebeecivic]

yep, That will work. If you dont wont to order it you could just go to your local car audio shop and buy one. It may even be cheaper. I bought one from a local shop named nortons car audio thats almost the excact same thing. Just buy the block, you don't need the fancy gold colored allen wrench that comes with some of the others and that they charge ten dollars more for. Buy they fuses from autozone or advanced and a battery cable and youv'e spent 43 dollars and some change. Good luck with the upgrade, Its simple.

 

 

hey zfreak thanks a lot for the encouragement I will get on it on monday

[Oddjob]

Here's the one I used:

 

http://www.crutchfield.com/p_211FBXS024/StreetWires-FBXS024.html?tp=3001

 

It's a bit more expensive than yours, but takes up to 125A fuses, and uses #1/0 cable in/out and #4 on the circuits.