7MGFORCE Posted July 12, 2009 Share Posted July 12, 2009 First off 1. Which is the stock feed line on a 260z tank? The top or bottom? I made a mistake of removing feed and return without labeling them. 2. Will the stock feed line be able to pump 110gph? If now how much? 3. For those who used the drain as their feed line what fitting did you guys used? The 3/8 fitting is to big of a tread siZe to fit. This is for an early 74 260z with a mallory pump for a stock sbf Thanks Quote Link to comment Share on other sites More sharing options...
g9m3c Posted July 12, 2009 Share Posted July 12, 2009 The supply/return lines on my 260 tank (late production year) are side by side. The best I can remember, the supply nipple is a tad larger than the return. I have no clue as to the flow ratings of them. Quote Link to comment Share on other sites More sharing options...
evildky Posted July 13, 2009 Share Posted July 13, 2009 on my series 1 chassis the lines were top and bottom and the bottom was feed IIRC, but the returnwas noticably smaller, I had constant fuel staration issues and sumped the stock tank Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.