PhilbertZ Posted August 4, 2009 Share Posted August 4, 2009 Hi guys, Upon failing smog for the first time, and doing some tune up (and reading the EFI Bible), I'm learning a lot about EFI and doing the ECU tests in the Bible (really great resource!). Also finding that the connectors on my EFI parts are old and brittle....upon removing the cold start valve harness connector, it simple cracked and now neeeds electrical tape to stay on. I'm wondering if there are sources for these plugs that I could use to "refresh" my engine bay - at least the EFI stuff like this? Are there generic plugs that could work with these connectors or do I need to use OEM? I'd rather get new plastic than another, 30 year old connector - for obvious reasons. Thanks in advance for any leads! Phil Quote Link to comment Share on other sites More sharing options...
Scott_M67 Posted August 4, 2009 Share Posted August 4, 2009 You can use the Bosch ones or buy the cheap ones on Ebay. Bosch P/N 1-287-013-003 Quote Link to comment Share on other sites More sharing options...
dhp123166 Posted August 4, 2009 Share Posted August 4, 2009 Or you can go to the junk yard and pull them off of Volvo's. Or Saab's. Quote Link to comment Share on other sites More sharing options...
PhilbertZ Posted August 4, 2009 Author Share Posted August 4, 2009 Thanks Scott! I didn't realize they were the same as the injectors. I found a great DIY about how to do this too: http://www.atlanticz.ca/zclub/techtips/injectors/connectors/index.html Thanks a TON! Phil Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.