trwebb26 Posted October 27, 2009 Share Posted October 27, 2009 Just wondering what everybody was running for the 440cc supra injectors in megasquirt. No resistor pack w/ PWM or resistor pack? opening time? PWM current limit? PWM time threshold? Quote Link to comment Share on other sites More sharing options...
Matt Cramer Posted October 27, 2009 Share Posted October 27, 2009 My Dart project was using them with a resistor pack - I'll probably go to PWM soon though. I'd just left the opening time at the default 1.0 but hadn't tried to really dial them in. Quote Link to comment Share on other sites More sharing options...
wigenOut-S30 Posted October 27, 2009 Share Posted October 27, 2009 I am running mark 3 turbo supra injectors that are 440s. They are low impedance and I think the required fuel is 7.2. Should I run resisters on my setup? everything seems to be working right now though. I will post my settings when Im home this afternoon and can look at the settings. Quote Link to comment Share on other sites More sharing options...
yetterben Posted May 15, 2010 Share Posted May 15, 2010 This is a really old thread but i need this info too. Anyone ever figure these numbers out. Quote Link to comment Share on other sites More sharing options...
z-ya Posted May 19, 2010 Share Posted May 19, 2010 This is a really old thread but i need this info too. Anyone ever figure these numbers out. I have one now that I will be testing. I will update the spreadsheet when I have the data. I measured the DC resistance and it is about 3 Ohms. Quote Link to comment Share on other sites More sharing options...
OhBilly Posted August 10, 2010 Share Posted August 10, 2010 I have one now that I will be testing. I will update the spreadsheet when I have the data. I measured the DC resistance and it is about 3 Ohms. Did you ever get around to testing this? Quote Link to comment Share on other sites More sharing options...
AtlantaZ Posted June 2, 2011 Share Posted June 2, 2011 Old thread - did anyone ever get a good set of PWM numbers for the 440cc Supra injectors in Megasquirt? Quote Link to comment Share on other sites More sharing options...
OhBilly Posted June 6, 2011 Share Posted June 6, 2011 There's a sticky in the FAQ section that says to use the same settings as those for the DSM 450cc injectors: Injector Opening Times Spreadsheet Hope this helps. Bill Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.