Zracer Posted November 2, 2009 Share Posted November 2, 2009 Looking for a set of L24 .040 over high compression pistons. Prefer new but used in good condition OK too. Email to TBork95577 "@" AOL.com or PM here. Thanks! Tom Quote Link to comment Share on other sites More sharing options...
BURLEIGH Posted November 3, 2009 Share Posted November 3, 2009 Hey Tom, I still have those Arias pistons that are in great shape. I haven't had a chance to get out there and double check the size, but I'm pretty sure they are .040 over. I'll try and get out there tomorrow and let you know. Thanks, Richard Quote Link to comment Share on other sites More sharing options...
Zracer Posted November 3, 2009 Author Share Posted November 3, 2009 Hey Tom, I still have those Arias pistons that are in great shape. I haven't had a chance to get out there and double check the size, but I'm pretty sure they are .040 over. I'll try and get out there tomorrow and let you know. Thanks, Richard OK, sounds good. Can you check to see if they are floating pins? We are using some aftermarket rods that are set up that way. I know some of the pistons for use with stock rods used pressed in pins. Tom Quote Link to comment Share on other sites More sharing options...
sbooth Posted December 14, 2009 Share Posted December 14, 2009 I have 6 Arias .020 over flat tops with no valve reliefs.These are used but come with new Total Seal Rings and are sitting in a rebuilt short block on the stand. They are non silicone so require .006 clearance. Full floating pins on non bushed 5.13 (L-28) rods are included. $200. Also some .020 Ampco cast pistons out of a 25K rebuild. Minimal skirt scuffs. Needs rings, $50. Call for details. 928-978-0499 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.