Jump to content
HybridZ

240 misfiring,need help


Recommended Posts

Hi Guys,first time posting on this site.I have a misfiring issue with my car(I think).I have a 72 240 with L28 bored 1mm,E88 head from 260,dual weber DGV's,ZX dizzy,MSD6 box,ZX alternator.It sounds like the timing is off but I have adjusted it from one extreme to the next with no change.The alt. gauge shows that it is overcharging(the alt. and MSD box are new although this problem existed before the upgrade).Could there be a short to ground somewhere causing the ignition to misfire?Any help is greatly appreciated

Link to comment
Share on other sites

  • 3 weeks later...

I've had caps go bad and look just fine, run good for a month, then crap out and barely run for 2 hours or so. then run just fine for a few more weeks, then crap out again.

 

 

 

Two is right check for the simplest things plugs, wires cap and rotor, some times the cap can crack inside and youwill never know it buy looking at it, some times the crack looks like hair.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...