putang29 Posted February 1, 2010 Share Posted February 1, 2010 I have an awd rb20det oil pan. All I have to do is remove the gearbox and cover the hole to use it as RWD? thanks. Quote Link to comment Share on other sites More sharing options...
pat1 Posted February 1, 2010 Share Posted February 1, 2010 the ft sump oil pans won't fit into the s30's. You have to use a rear sump pan. I can build you one. Check out my thread below. Quote Link to comment Share on other sites More sharing options...
putang29 Posted February 1, 2010 Author Share Posted February 1, 2010 the car i am using is a 1990 infiniti m30 my engine is a rb20det the engine came with the awd tranny and oil pan. i am planning on using a 300zx tranny and converting the rb20det awd oil pan with mods. my buddy said that all i have to do with the awd oilpan is remove the gearbox from it and have some1 weld the hole closed what is your opinion? thanks. Quote Link to comment Share on other sites More sharing options...
Careless Posted February 2, 2010 Share Posted February 2, 2010 it could work. best would be to take the oil pan off. take some measurements of the engine, and then take your VG30 out of your m30 and plop your oil pan over the subframe and see what needs to be changed. Also, let me know when you start removing stuff from the M30. I may need parts from it depending on where you're located. Quote Link to comment Share on other sites More sharing options...
putang29 Posted February 2, 2010 Author Share Posted February 2, 2010 the vg30e is already out of the car and the auto tranny is sittin under the car. So I can just mod up the vg30e auto oil pan to fit? I dont want to spend 200 bux ordering a new oil pan if I can just take it to the weld shop and get it done that way. Im in Texa by the way, what parts do you need? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.