Cunnz240 Posted March 15, 2010 Share Posted March 15, 2010 I have a 240 with a l28et. I have access to an 88 turbo z31 parts car in almost perfect condition. I have read up about the swap and how to splice it into the existing harness. I would like to know if it is possible to just swap in the z31 harness as well. Also is it possible to run the side feed injectors on my motor. I dont want to have to run resistors to each injector, as the 88 injectors are high impedance and my current ones are low. My current injectors are also in pretty bad shape and i know that these ones are in very good shape. Thanks. -S Quote Link to comment Share on other sites More sharing options...
Cunnz240 Posted March 15, 2010 Author Share Posted March 15, 2010 I just took a look at those injectors and they are very different. So never mind about them, but the harness question still remains. Quote Link to comment Share on other sites More sharing options...
SleeperZ Posted March 15, 2010 Share Posted March 15, 2010 You may have to relocate the computer to the right side with the Z31 harness. I spliced the Z31 connectors to my L28ET harness to run the Z31 ECU. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.