wigenOut-S30 Posted March 23, 2010 Share Posted March 23, 2010 (edited) Hey guys, I got the Rota RBR's from the group buy recently and I am really impressed with them and thanks very much to Chris for all his hard work! I think we should have a thread about tire sizes and what people currently have and Data to go along with it. Pics are welcome as well! Here are the tire sizes I have been thinking about. It seems that the 255-40R17s are a little too wide up front and rub on some things. Other things we can discuss is: When running a smaller tire up front.. will that cause understeer? Thoes who already have these and logged some miles on them.. has that caused understeer? 275-40R17 = 10.8 wide and 25.66 Tall Rears 245-45R17 = 9.64 wide and 25.68 tall Front 245-40R17 = 9.64 wide and 24.71 tall Front ------ Not sure about what to run up front------ 255-40R17 = 10.03 wide and 25.03 tall Front I am a little on the fence with going to a 245-40 or a 245-45 for the front. It seems that the 255-40's are a little wider and seem to be a problem rubbing on things Edited March 23, 2010 by wigenOut-S30 Quote Link to comment Share on other sites More sharing options...
Drax240z Posted March 24, 2010 Share Posted March 24, 2010 My plan is to run 245/40R17 up front, and 255/40R17 in the rear. Trying to keep the diameter down at both ends. Quote Link to comment Share on other sites More sharing options...
jeffer949 Posted March 24, 2010 Share Posted March 24, 2010 Where did you get that it rubs?? my 255's up front don't rub at all. Quote Link to comment Share on other sites More sharing options...
dsommer Posted March 24, 2010 Share Posted March 24, 2010 I'm going 275 on the rear, haven't run the set up yet though. Car is kinda in "parts" Quote Link to comment Share on other sites More sharing options...
wigenOut-S30 Posted March 24, 2010 Author Share Posted March 24, 2010 Where did you get that it rubs?? my 255's up front don't rub at all. the 245-45R17s rub the front fender just a little. and from what I read the 255-40s might touch the sway bar and the tension rod? When I remade my battery box I made it come down to far and the 245s were all in it.. so I cut out a triangular section and welded in new metal.. It clears now but not sure if the 255s would clear. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.