kenz240z Posted March 26, 2010 Share Posted March 26, 2010 Here are a couple of shots of a T-56 cross member I made for my '73 240Z LT-1/T-56 swap. I used 2" X 1/4" bar stock. I heated the bar stock with an oxy-acetylene torch to make the bends. I welded a couple of nuts to some 18 guage metal and ran the mounting bolts up through the floor. These will ultimately be tack welded to the floor after I finish up patching the holes in the floor... Quote Link to comment Share on other sites More sharing options...
piston Posted March 28, 2010 Share Posted March 28, 2010 i have seen so many sbc guys run it that way. im so curious if anyone has broken or rip their floor pans from just mounting it flat like that. i mounted mine flat like yours also when i had my old t56. im doing something different now and was thinking about welding in a 1/8 plate onto the floors then drill through for extra security. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.