B00STDZ Posted October 2, 2010 Share Posted October 2, 2010 (edited) Alright I know z32's dont get too much love on this forum but i thought i would try anyways. What would be needed to convert a N/A convertible(has na 4.08 r200) to have a twin turbo 3.69 r230 vlsd? Also some have told me the N/A differential is open, some say vlsd...Which one is it? Edited October 2, 2010 by B00STDZ Quote Link to comment Share on other sites More sharing options...
dts300z Posted October 7, 2010 Share Posted October 7, 2010 I believe all of the Z32 diffs are VLSD r200 and r230. To swap in the R230 you will need to pretty much get a TT rear sub frame, axles, drive shaft (r230 has a different companion flange), diff etc... I looked into this for a while and decided against it since the r200 seem to hold sufficient power and come in an array of gear ratio's like 4.08, 3.69, 3.54, 3.31 (I have seen a few of these but not very often)some of which require swapping of axle ends and drilling new holes in the companion flange to accept the N/A drive shaft. I won't get into the route I took since it's not a real feasible route for most people. Good luck! Dan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.