MSA Type 2 Body Kit Mounting

[JSM]

I picked up this used MSA kit, however, I'm not exactly sure how to mount the rear. Is it supposed to sit lower like they have it in there pics or higher like I have it mocked in my photo? Could I get some other pics of the rear of some of your cars? I'm curious most to how far down from the lights it should sit.

 

Theres:

 

http://www.thezstore.com/store/graphics/00000001/large501504ic.jpg

 

Mine:

 

http://s636.photobucket.com/albums/uu85/jeffreysm/?action=view&current=MSA280z.jpg

[calpoly-z]

I've got a few pics located here: http://s32.photobucket.com/albums/d27/alecnet/77%20280Z%20Turbo/

 

that might help you out on how mine is mounted. I also went out to the garage and took a look real quick, and I definitely don't have it mounted as low as they do in the MSA pic. But I dont think mine is quite as high up as you have yours mocked up. let me know if you need better pics and I'll try to get some uploaded.

[zedrum]

I've got a few pics located here: http://s32.photobucket.com/albums/d27/alecnet/77%20280Z%20Turbo/

 

that might help you out on how mine is mounted. I also went out to the garage and took a look real quick, and I definitely don't have it mounted as low as they do in the MSA pic. But I dont think mine is quite as high up as you have yours mocked up. let me know if you need better pics and I'll try to get some uploaded.

 

I think mine sits about the same, maybe a 1/2" or 5/8" of the rear apron showing at the center of the bumper cover:

 

[SHO-Z]

I raised mine to make the gaps as narrow as possible. I glassed the under sides to close the gaps.

 

http://forums.hybridz.org/index.php/gallery/member/420-sho-z/