Jump to content
HybridZ

SHO-Z

Members
  • Posts

    710
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by SHO-Z

  1. It is heck getting old, sold my Z and now am the owner of a C5 Corvette. Took a while to find a new used ride but had to have some type of sports car.
  2. There are 2 flasher units on the drivers side by the firewall. One is the one for the emergency flasher and one for the turn signals. They are round and about the size of a half dollar.
  3. Buy the 140 and watch craiglist for a used Maxstar for Tig & stick. I perfer TIG on SS.
  4. Why do you think that a mechanical engineer knows how to weld? I am a ME and the only reason I know how to weld is I was a pipefitter welder for years before I went back to school and got my degree. I have 2 welders now an Miller Maxstar for tig and stick and a Lincoln 135 with gas for Mig. I really do no need an aluminum welder.
  5. I have one but it is in Arizona, but it is only the engine, intake and exhaust manifold, turbo, computer and wiring harness. $400 with engine stand. Year is unknown to me.
  6. Was this engine running previously? If you just rebuilt it your timing could be 180 deg out.
  7. For high RPMs 327 block and 283 crank = 302 Z28 engine. This was Chevys best high RPM engine.
  8. Please do no call it a roadster. Roadsters have no side windows, like the old TR3 had side curtains. It is really a convertible coupe. I have some books from around 1920 that gives this description. Have fun with the new project.
  9. I have a square port header with new gasket $60 plus shipping. Shipping is around $50 the last time I checked.
  10. Had one as a daily drive in Colorado 30+ years ago. Only thing I did on this high milage car was put a set of brushes in the altenator. But the car was evil on ICE and a handfull on snow.
  11. Isn't there something about cars that came from the factory with dual carbs being exempt in calif. I had a XK140 coupe years ago that was hit in a parking lot. I got the insurance company to fix it instead of total it by requesting that they replace it with another XK140 Coupe, after having a high school kid in a mustang rental car for a couple weeks they fixed it. Tell them to replace it with another Z with the same mods.
  12. Back in the 60s the cobra teams wanted to run the 351 cleveland and not the 427 engine. In testing the 351 was faster around the track and more drive able. But Ford wanted them to only run the 427.
  13. Sold the car, new owner put a V8 in it and it went through a tool box when it fell off of a jack. So no Z in my garage now.
  14. I was going to do a forced induction on 45 mm SK Racing carbs. My box is built out of 4x4 aluminum tube stock. Sold the car so they are sitting on the shelf now. Just realized I built the box over 4 years ago. I was also considering using it on CAI. I would also look at building a box for the air cleaner to get some positive pressure at speed.
  15. The way it is set up is if you have an Engineering Technology Degree from an ABET apporoved program you have to wait until after graduation to take the Engineer in Training exam and then it is the same wait as for everyone to take the PE exam. A regular degree can take it during thier senior year for the EIT. I really used one book the PE Referance Manual. If you get a change look at one in the book store. You will see it is just basic, plug and chug formulas, math based. Also look on Half.com and pick up an older copy of the book, it explains a lot of your studies better than in the text books. We had a young engineer working for us a few years ago from a major engineering college who graduated near the top of his class who could not calculate the pipe size required on an air line. All of his flow work was done in a wind tunnel. Show to me that he didn't have the basics.
  16. There is another way into engineering. I have a BS in Mech Engineering Technology from Metropolitain State College of Denver, did not have to take Calc 3 or differential equations and my physics was algebra based not calc based. It is not the degree for those who want a masters in engineering. It is set up for a design engineering position. I had a back injury as a pipefitter and had to find a new occupation. Now that I have a PE no one really cares what I have.
  17. To get back on topic I have seen several people want to put a double overhead cam set up on an L6 with no results. It would be neat if someone did but the cost is just too much. Between the 2 heads shown there are too many differences.
  18. I was lucky classed were cheaper and some of my professors wrote thier own books, loose papers I put in a binder for my ME degree. Look at the bright side after you become an engineer you will add, subtract, multiply and divide, look in up in a book and know our answer makes sense. Hang in there, if you do not understand the subject go to the professor and sit on thier desk and have them go through what you do not understand. They do work for you. I had to write every problem out even if I had the solution in front of me. The Engineer In Training exam has about 10 differential equations the Professional Engineer exam only has simple algebra problems. It shows where most of us engineers use math.
  19. If you cannot find what you are looking for I have a turbo motor that is missing the the MAF and fuel rail. What I know it has is the intake, exhaust, turbo, engine, wiring harness and computer. I would like to get $400 with engine stand. I am located just west of Phoenix.
  20. No expert on this but sounds like a pluged fuel filter to me.
  21. I got mine from http://redlineweber.com/ they were helpful in my SK Racing parts that are the same as weber.
  22. Have 2 of them. I put a hole in a gas tank back in the 60s. Sealed it up with about 10 cents of “Double Bubble†Bubble Gum. It never leaked after that and sold the car with it still stuck to the bottom of the tank 6 months later. Broke a fan belt at night going across Northern New Mexico in my Ford Van. Light were going dim and the only gas stations open had replaced the auto parts for Indian Jewelry. I noticed that the Van was not overheating so took the AC belt and put it on the alternator. Drove from Gallup NM to Flagstaff AZ with just the wind turning the water pump. Going through some of the towns the Van would start to get hot but would cool right down on the highway.
  23. In some states in the US this is a Tow away ticket, the car cannot be driven. Zs use their tail lights as reflectors and DOT requires reflectors on the back of every vehicle. So you are dealing with federal regs not only state regs. Also in a tail end collision you could be found at fault.
  24. When I installed a ZX master in my Z had the same problem. There are bleed ports on side the master cylinder, I bled them and the problem went away. I just used the old hose into a beer bottle with brake fluid methold.
  25. I have all of the parts for the ZX conversion these are the parts that the guy I bought the brackets from told me to use. I will only sell them as complete unit. Sold my Z so they are gathering dust. The mounting brackets are machined aluminum, near new ZX calipers and new rotors. Will let go for $280 including shipping. I also have set of front calipers off of a 4runner they are the wide model so need wheel spacers with stock rims, $80 including shipping.
×
×
  • Create New...