LQ4 D.B.W. throttle body to LS2/3/7 D.B.W. throttle body

[Dans toy]

Hoping to get some help on a throttle body change. I have a magnuson blower on a Lq4 motor with a 75mm D.B.W. throttle body . I'm considering going to a ls7 90mm but concerned about any electronic issues. I know that it would require a pigtail change,3 to 4 hole adaptor and tuning changes but not sure about any other electonic issues. Also I may try to adapt an LS7 mass air sencor if possible. I'd appreciate any information. Dan

[280Z76LS2]

if you re trying to run your throttle body driven by wire the is adapter harness from ls1 to ls2,ls3

 

http://www.amazon.com/gp/product/B000J1PKPU/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=1278548962&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B000IJBPUM&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=0340NBFR0JTAYGKJKM60

[Blown77Z]

Hoping to get some help on a throttle body change. I have a magnuson blower on a Lq4 motor with a 75mm D.B.W. throttle body . I'm considering going to a ls7 90mm but concerned about any electronic issues. I know that it would require a pigtail change,3 to 4 hole adaptor and tuning changes but not sure about any other electonic issues. Also I may try to adapt an LS7 mass air sencor if possible. I'd appreciate any information. Dan

 

 

Could you post pictures of your engine setup !!! This is going into a S30 chassis right?

[Dans toy]

Its a 74 260z . 2001 LQ4 engine with 2005 wire harness(d.b.w.) and a 112 magnuson blower. I don't know how to post pictures but I'll see what I can do. There is somewhat of a picture in my profile. My concerns are that just using an adaptor is not all the elect. issues. Thanks for your comments . Dan

[BRAAP]

Would love to see some pics.

 

 

...

I don't know how to post pictures but I'll see what I can do.

....

This should help;

http://forums.hybridz.org/index.php/topic/57387-“how-to”-post-pictures-on-hybridz-the-easy-way…/