SUNNY Z Posted December 24, 2010 Share Posted December 24, 2010 Please post part #, price, and where you got them. I ordered an Autometer gauge kit, in the Carbon Fiber Ultralite vairiety. Little did I know that I had ordered 3 3/8" speedo / tach, and 2 1/16" everything else. I went through and priced it out, and it's over $100 more($700+total), which is out of my price range. I'm not dead set on the CF gauges, so lemme know what ya have! Quote Link to comment Share on other sites More sharing options...
ComicArtist Posted December 24, 2010 Share Posted December 24, 2010 GlowShift makes sweet gauges. I'm running a Boost/Vacuum gauge and a wideband AFR gauge right now and am very happy. Planning on switching to all GlowShifts in the future. Quote Link to comment Share on other sites More sharing options...
h4nsm0l3m4n Posted December 24, 2010 Share Posted December 24, 2010 Are you building a custom dash? I think 3 3/8 speedo and tach gauges would look very small in the stock gauge pods. I used the 5" Autometer Ultralites, they fit perfect. I'm using the stock gauges for the rest until I save up a little more money and figure out what I'd like to do with the dash. Quote Link to comment Share on other sites More sharing options...
ktm Posted December 24, 2010 Share Posted December 24, 2010 A few of us are running Speedhut gauges. Much nicer than Autometer and substantially cheaper than their full electric gauges. Quote Link to comment Share on other sites More sharing options...
SUNNY Z Posted December 24, 2010 Author Share Posted December 24, 2010 (edited) Please post part #, price, and where you got them. I ordered an Autometer gauge kit, in the Carbon Fiber Ultralite vairiety. Little did I know that I had ordered 3 3/8" speedo / tach, and 2 1/16" everything else. I went through and priced it out, and it's over $100 more($700+total), which is out of my price range. I'm not dead set on the CF gauges, so lemme know what ya have! I guess I should have been a little more specific. I am using a stock dash, reconditioned. ( by me) I intended to order 5" tach and speedo, and 2 3/8" everything else. I did NOT get the correct ones, so they're going back. Edited December 24, 2010 by SUNNY Z Quote Link to comment Share on other sites More sharing options...
SUNNY Z Posted December 26, 2010 Author Share Posted December 26, 2010 Is a Volt gauge even really needed? I mean I think I'd notice it my lights were dimming and the engine was having trouble running. That would eliminate the need to find a slot for that pesky 4th gauge. Does anyone know where I could buy a pillar pod for my A pillar? Quote Link to comment Share on other sites More sharing options...
Ls240sx Posted December 28, 2010 Share Posted December 28, 2010 Is a Volt gauge even really needed? I mean I think I'd notice it my lights were dimming and the engine was having trouble running. That would eliminate the need to find a slot for that pesky 4th gauge. Does anyone know where I could buy a pillar pod for my A pillar? I do not believe anyone makes one. I thought i found someone on here that was making one out of one for a different car. Like a dsm or something. Quote Link to comment Share on other sites More sharing options...
Cable Posted December 28, 2010 Share Posted December 28, 2010 Lots of guys here use a modified first gen Miata A-pillar pod. I bought one once, but didn't like how much it got in my line of sight. I ended up selling it. Some guys don't mind, to each his own I guess. Quote Link to comment Share on other sites More sharing options...
SUNNY Z Posted December 29, 2010 Author Share Posted December 29, 2010 Well I did some searching (google) and actually found a thread on here where someone was designing one using 3D imaging. Looked interesting, but it was still at the drawing board stage Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.