EatZrib Posted December 30, 2010 Share Posted December 30, 2010 The digital gauges are pretty cool. But the speedometer stops increasing after 85mph. I know I'm still accelerating past that but it get annoying not knowing how fast you're really going. Anyone know how to take it off or adjust the settings? Oh it's 2+2 n/a if it helps Quote Link to comment Share on other sites More sharing options...
palladin Posted January 5, 2011 Share Posted January 5, 2011 That was a govt mandate at the time. Don't know how you would change it. Quote Link to comment Share on other sites More sharing options...
SCCAZ Posted January 25, 2011 Share Posted January 25, 2011 Cant change it. I, however, pulled it out and put in an analog 130mph speedo, back in 93-94 or so. Then the internet made a big splash, followed by this site. oh how time flies. Quote Link to comment Share on other sites More sharing options...
Brad-ManQ45 Posted January 26, 2011 Share Posted January 26, 2011 You could get close w/a .66:1 reduction drive on the T5 tranny/speedometer output and set the Speedo to read KPH (which would use all 3 digits). You would be a bit off, but with a bit taller tire you'd be close. YOu'd be the diff between .62 (actual KPH/MPH reduction and the .66 that the actual reduction gearing has that JTR offers. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.