J240ZTurbo Posted January 10, 2011 Share Posted January 10, 2011 Hi, does anyone know why the oil gauge is not showing any oil preasure nor temp on a 1988 300zx Turbo? thanks, Juan. Quote Link to comment Share on other sites More sharing options...
BLOZ UP Posted January 10, 2011 Share Posted January 10, 2011 Either because you have no oil pressure, or the oil pressure sending unit is borken, or maybe the gauge or some wiring inbetween is borken. However, the sending unit is a known problem on these cars. It's below the passenger side exhaust manifold, behind the oil filter. It's a lot of fun to get off... Quote Link to comment Share on other sites More sharing options...
J240ZTurbo Posted January 11, 2011 Author Share Posted January 11, 2011 if is not sending unit and I still got no oil preasure then I should change the oil pump correct? Quote Link to comment Share on other sites More sharing options...
BLOZ UP Posted January 11, 2011 Share Posted January 11, 2011 You should see if you really have oil pressure or if it's a gauge issue. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.