98cobra+75280z Posted January 13, 2011 Share Posted January 13, 2011 I have been trying to figure out how to set up Launch Control in Megatune, Im just not very sure on what settings to use. Any way someone with Launch control on their megasquirt could explain what values they choose and why. thanks for any help very much. Kevin Quote Link to comment Share on other sites More sharing options...
BLOZ UP Posted January 13, 2011 Share Posted January 13, 2011 Find your best launch RPM, then set your MS soft (retard above) and hard limits around it. May have to play around with RPM and retard values till you get some that hold the RPMs steadier. 0 or negative retardation worked best for me. Also I just set the flat shift limits at redline, but retarded quite a bit. Makes some good noise. Quote Link to comment Share on other sites More sharing options...
98cobra+75280z Posted January 13, 2011 Author Share Posted January 13, 2011 to use launch control does it need to be wired to a switch. I don't understand how it will work and not also limit your free revving or driving rpm's with out being wired to a switch or something along those lines.?? can someone show me where to find the information, I've searched DIYautotune and the megamanual and can't seem to come across anything that explains how the launch control feature works in megasquirt. thanks again for your help kevin Quote Link to comment Share on other sites More sharing options...
Matt Cramer Posted January 17, 2011 Share Posted January 17, 2011 Yes, you'll need a few mods - see this link in the MS1/Extra manual: http://www.msextra.com/doc/ms1extra/MS_Extra_Hardware_Manual.htm#launchC Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.