Jump to content
HybridZ

wtb dual carb setup


Mr.Roboto

Recommended Posts

Guest 79_RHD_280Z

I have a complete set up from a 74 260Z....carbs may need cleaned... been sitting for awhile...

 

LMK if interested...

 

Thanks, Chris.

Link to comment
Share on other sites

I took these off of my L28 with E88 head very recently...

 

post-4218-032163800 1303908006_thumb.jpg

 

They are quite nice. They are the 4 screw (early) version that is desired. I had them rebuilt in 1994 with new Nissan OE: thottle shafts, thottle plates, throttle shaft bushings, jet nozzles, screws for domes, screws for float covers, and the hoses that go from the float chamber to the nozzles. I replaced the stock N27 needles with the "SM" needles which are the hot ticket for the L28 engine. I put some attention to polishing the domes some time ago. That is why they look pretty good. They could use a maintenance polish to make them really shine again.

 

While replacing one of the shaft bushings during the rebuild, the aluminum around it broke. This was expertly tig welded (and run on the car since 1994 with no issues). Also, one of the air filter tabs was tig welded and redrilled at the same time.

 

They do have some miles on them - probably 70k since the rebuild, but they work great. I have the heat shield also... If you think you are interested, I will post a few more pics. I was getting ready to sell them on eBay...

 

I'm not sure on pricing because I haven't looked to see what they are worth yet. I know that Ztherapy ones are like $600, and these obviously aren't anything near that nice. My rough guess is $250, but let me look around and see...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...