Jump to content
HybridZ
  • entries
    2
  • comments
    2
  • views
    7513

Coilover parts

neotech84

Entry posted by neotech84

3528 views

 Share
I need to fix my front suspension (struts/springs) and have searched' date=' read this thread, & also the Brian's garage link. Looks like the only 280 procurement issue is the stop with the 2.17" ID. Any thoughts on exhaust pipe here swaged out a little or does the stop need to be larger in diameter than exhaust tubing?

 

I also noted some of his parts links were not valid part numbers, and by searching here, our member Here Comes Trouble linked this stuff at A1 racing.

 

COK12450.jpg

COK12452-H

5" COIL OVER SLEEVE, SPECIAL ORDER, FITS STRUT HOUSINGS, SLEEVE I.D. IS 2.170"

 

List Price $24.44

 

Your Price $18.80

 

In the thread, Trouble advised someone had bought all 100 they had made and he was trying to get in touch with him. He also posted a link to Held Motorsports for 2.170 parts.

 

COK12462.jpg

COK12462

COIL OVER NUT FOR 2 1/2" I.D. SPRING, FITS COK12442/48/49 COIL OVER KITS AND COK12453/59 COIL OVER SLEEVES

 

List Price $16.73

 

Your Price $12.87

 

COK12470.jpg

COK12470

COIL OVER TOP, NON-SLOTTED FOR 2 1/2" I.D. SPRING, FITS PRO SHOCKS and MOST STRUT APPLICATIONS

 

List Price $16.30

 

Your Price $12.54

 

 

Summit seems to have the best deal for 2.5" springs as listed on Brian's page.

 

I'm planning on running 10" springs front & rear, no desire to radically lower the car beyond stock ride height (my problem is I curently have 6" between the 14" tire & fender lip, no idea what the rate is for these springs but it must be up there or from another car).

 

EDIT

I took the struts apart & the springs that were in there are 15" uncompressed.

 

 

 

Found this great thread, has good info for coilovers.

 Share

2 Comments

Recommended Comments

Kevin.pk

if you have a welder, you can modify the stock top mounts and save an extra $48.

 

I just welded some 2.5" diameter exhaust pipe in the center of the stock upper metal mount to center the spring. Cheap and effective.

Link to comment
FLC

I just got my ground control setup a few days ago and when i test fitted my top hat on to my strut it just slides down to the bottom of the ram isn't it supposed to stop at the base of the threads? i want to retain my factory strut mount so i guess i don't need it at all but not sure i think i may be pulling the exhaust trick on it like mentioned above.

Link to comment
Guest
Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
×
  • Create New...