[WTB early 240z 4 speed 70-71 transmission tail section.]

If any one has a early 240z 4 speed 70-71 transmission tail section that they would like to sell let me know.

 

or even just the shifter linkage part.

 

It very easy to remove the tail section

 

I had a transmission shipped and they broke off the shifter part.

 

 

[Inspection lid "clips"]

metal or plastic clips? early series 1 cars have plastic and later cars have metal.

[WTB early 240z 70-71 shifter]

found and purchased, thanks Litman

[WTB early 240z 70-71 shifter]

pm back

[WTB early 240z 70-71 shifter]

Looking for early style 70-71 shifter.

 

like this.

 

thanks steve

[Stock Fuel Rail replaced flooding issue]

Does the Stock fuel rail have a smaller return line? looks like your new set up has the same size feed and return line. Hard to tell from the pictures.

[1 tuff z: 1972 Fairlady Z-L project!]

Nice find.. I replaced my roof also which had a sunroof.

Steve

[3.1L Dyno results...Thoughts?]

Here is a Rebello built 3.2L for comparison.

 

[Body and paint knowledge help]

Check out the link below, they also have a forum.

 

 

 

http://www.autobodystore.com/

[71 240z 18 months of work.]

Choke and hand throttle assembly finished.

 

 

 

 

[71 240z 18 months of work.]

I just picked up a Brand new factory dash that had never been opened in original packaging, even had to break the sealing tape.  A rare find I must say, and it was less than 10 miles from my house.

[Sunroof, should I patch or cut?]

We just did that to our '72 240 in the shop.  Our first foray into cutting an entire roof off a donor, drilling all the spotwelds, melting the lead at each pillar, cutting the welds at the corners and separating the roof skin.  Not for the faint-of-heart, but definitely do-able.  The right tools help.  And, there are some great guides by guys who paved the path.  Bone up on everything required and which side to drill spot welds on which piece.  You can have a replacement roof that almost looks like the factory installed it.

 

They're right that a "patch" is extremely difficult to get right.

 

This is exactly the way I replaced my roof skin.

 

 

 

[WTB - Door latch piece [NH]]

make sure you get the screws also, some types of Door lock mechanisms  come with longer and shorter screws.

 

Steve

[71 240z 18 months of work.]

Making rubber parts has slowed down the work on the car but I do have more rubber parts made and installed on the car.

 

I am also offering custom 240z brake and fuel lines with custom  insulators for a 5/16" return fuel line, same size as main fuel line.

 

check site of other new items.

 

www.240zrubberparts.com

 

New Clutch pedal stopper on firewall.

 

 

Wiper motor bracket rubber bushings.

 

 

 

Radiator support wire pass through insulators.

 

 

Door lock mechanism rubber pieces.

 

 

 

Euro Tail lights

 

 

 

Reproduction slot blank tape and correct 71 choke handle.

 

 

refurbished the fuel sending/pump harness with new grommet.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[WTB: 240z Horn Pad]

If case you need a replacement inner ring for the horn pad I have them.

 

http://www.240zrubberparts.com/apps/webstore/products/show/4432194

 

 

steve

 

 

[240z front turn signal harness/wires]

looking for a set of 240z front turn signal harness/wires.

let me know what you have.

Steve

[78 280Z Fenders]

I ordered a new set from my local Nissan last year and they came from the warehouse, dont know if still available or not.

[Wtb 78 280z radio knob]

not sure if the same as the 240z knobs but let me know, I have some with blemishes that are not seen once installed at a much lower price.

 

http://www.240zrubberparts.com/apps/webstore/products/show/4425143

 

steve

[280zx turbo cv outer boots]

These are the boot kits for 280zx turbo

Beck Arnley 103-2282 CV Joint Boot Kit

Beck Arnley 103-2280 CV Joint Boot Kit

 

 

http://forums.hybridz.org/topic/64014-280zx-turbo-cv-boot-replacement-56k-beware/?p=1063110

[71 240z 18 months of work.]

reproduced the early style 70-71 choke cable grommet.

 

 

 

[71 240z 18 months of work.]

reproduced the Arizona Z Car rear control arm bushing, which are a hard rigid plastic type, with a shore hardness 90A urethane.

 

 

 

[71 240z 18 months of work.]

reproduced the 70'-71' gas door latch seal.

 

 

 

[71 240z 18 months of work.]

Thanks... yes, all the items I have reproduced are available for purchase...

 

Steve

 

The car is going to be awesome once it's done .  . Are you taking orders or making parts upon request ?

[71 240z 18 months of work.]

All in the tiny details at this point in my build.

 

I have replaced all 40+ rubber tabs that hold the wires to the body.

 

 

 

 

 

I had to reweld a few tabs that broke off while moving the tabs. Welding after Paint so I had to be very careful while doing this.

 

 

I could not stand looking at the yellow/worn out defrost wire boot, so I molded my own in clear and also a black version. I went with the clear version, just like the original.

 

The one on the bottom is the original and above are my reproductions.

 

 

[early style choke grommet]

it can even be broken into piece that I can put back together.

 

Steve