-
Posts
283 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by a6t8vw
-
-
I believe the input shaft is not the right length for the LS1 T56. Thh LT1 t56 will go in however. Sell the LS1 unit, and buy an LT1 (you can probably make some $ on the deal)
Thanks for the reply, damn i didnt want to hear that... so ill need to change the imput shaft... or get a lt1 t56.
I wonder if the ls1 t56 its too short or too long
-
Hey guys,
brief description of mysetup
I have a 1973 350 chev and TH350 trans
I just got a '98 WS6 T56 transmission with bellhousing .
From what i read this will bolt up to my motor?
I need help on selecting flywheel and clutch
is there anything special that i need to know about when using t56 on gen I small blocks?
what flywheel/clutch did you use?
thanks for your time
andrew
-
hey guys my 18" wheels are killing me on tire price so im gonna go with the 16x8 +0 002 sport max like alot of you have..
my question - Is anyone running 245/50-16 on lowerd 4" springs? i would like to try and fit a 245 tires at least because right now i have a 265/35-18 on back right now and it seems to hook pretty well despite it being a 35 series.
I know your saying "your already running 265!" yes but i have 18" wheels with +40mm offset and im running a custom 1" adapter in the rear and i have rolled the lip a little.
whats funny is the rear lower spring perch is under Parallel with the top of my wheel. It is very close to the tire tho.
Andrew
-
HarrisonTX what motor are you running ford or chevy?
-
stage I 125mph L28e cold air intake, and a hose clamp on the fuel return line..approx 65 psi fuel pressure... car really ran great with that hose clamp boosting fuel pressure to the rail...heh
stage II sbc 280z only 85mph CUZ TH350 BLOWS!!@!$# (see sig)
-
Thanks for all the info guys but im going to use the 24x12x3" crossflow, seems to make for an ez install... like big phil!
but i will have mine against the core support. Does anyone have any pic's of a intercooler behind a type-3 airdamn?
$100 shipped ebay
-
-
interesting... most SC/turbo setups ive seen the supercharger feeds the turbo but this has been on diesel apps... its going to be trial and error with this one.. What are the spec's on that turbo? compressor/turbine wheel size?
-
These tial knock off's are now over $100... makes sense just to pay 100 more for the real deal..
-
the quality of these "china" turbos are getting better but i sure wouldn't chance it..
-
Ok I painted my type3 and mounted it. I will push the car out in the light and get some better shots.. but here is what I have so far.. I really like this front end and I cannot wait to get some driving lights for her..
Looks great man, what size intercooler is that?
-
im going for 600 crank HP, what size do you recomend?
-
here's one similar to above but this is from holset
This map shows the pro-52 flowing damn near 120
The compressor wheel is 71mm and comes with a 16/cm2 exhaust housing with 70mm turbine wheel. basicly a hx55/hx40 hybrid but has newly designed wheels (2004?)and a special high flowing turbine trim.
Diesel guys push this turbo to over 50 psi on a regular basis about 600hp.. but thats diesel HP. On a gas motor this is a 1000+hp turbo.
There is also another hx52 turbo non "PRO" that came on volvo diesel trucks. it has a 67mm compressor wheel and a smaller shaft than the PRO52 so it cant be pushed as hard.
I have a pro-52 for sale in classifieds if anyones interested
-
No replacement for displacement.
-
Hey guys im wondering what the biggest front mount intercooler you can fit in front of the S30?
Seems the 24"x12"x3" style is the biggest and easyer one to install?
What size is the one your running ?
thanks, Andy
-
Hey guys,
I'm removing my TH350 trans to install my camaro tremec t-5 and was wondering if my current driveshaft would work?
The t-5 is is longer correct? id be happy if i had to cut down my current shaft instead of buying a whole new one.. i hope this is the case
Also T-5 Output shaft spline count is 31? and Th350 is 27? im not sure if this is correct but looks like ill need to change yokes.
Anyone else switch from TH350 to T-5?
Andy
-
it would beed to have some adjustability?, like you said the location of the gates are critical
-
yeah I do, it can be pulled off... but IMHO the full msa 3 body kits looks kinda ricerish...
well i got two thumbs up!
-
i have two push start buttons in my car, requires both hands at the same time to start it..
But i think the best anti theft is a fuel pump switch hidden somewhere.
I did this in a (carbed) F-350 i had. i would even turn the pump off down the street so the carb would run out of fuel in front of my house..ha
-
yeah, maybe bigger injectors more boost? should get the tires spinning into 3rd gear
-
it really depends on how much money you want to spend. When i try to decide on hybrid swaps i goto the local pick-a-part and see what can easily be had.. If i had ALOT of money id go RB or SR without a doubt.
Since i wanted the best bang for the buck i put a 350 chevy in mine...
if i could do it all over again id put in '86-'95 5.0 ford or 2.3L ford l4 ,KADE from u.s. 240sx's because There are TONS of parts 15 mins down the street at pick-a-parts waiting to be had CHEAP
1jz or RB25 - 1jz beacuse parts are easy to find localy..... have you thought of 7mgt? TONS of parts. and since your going turbo anyway only a few more pounds of boost the 7mgte will make same power as 1jz
check out this site http://www.racetep.com/7mgt.htm
-
loving the car texis, i cant help but wonder what a blow thrugh setup would do vs the draw through... kinda wish i didnt pull my L28 so quick to install the chevy motor but ill try it on my next z... keep us posted on yours.... Peace
-
i found a '93 subaru legacy in good condition for $1000 on craigslist, runs great no problems at 140k mi.
but this is more fun for the snow
-
i helped a good friend of mine install a holset HX35 turbocharger on his 325i Boy those are strong motors. 1-2-3 gears just spins the tires. holds 1 bar of boost with 250k miles on the bottom end.
T-56 help
in Gen I & II Chevy V8 Tech Board
Posted
what clutch/flywheel are you guys useing, im probably going to order the weir kit next week, thanks