Jump to content
HybridZ

~KnuckleDuster~

Members
  • Posts

    1294
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by ~KnuckleDuster~

  1. Shortly after putting in the new coil pack I started having another performance issue. Car seemed down on power and started running lean. Then finally progressed into hard starting where a throttle blip was necessary to keep her running. So I figured one of the last untouched items on the car should be swapped out, the fuel pump. I bought a Walbro 255 to replace the unknown branded pump that had a date of 2006 stamped on it. When I removed the old one I pulled out a chunk of medal and saw other rusty looking debris inside. I bought a mesh screened fuel filter to go in between the tank and the pump to catch whatever nasty crap still lurks inside my tank. you can open it up and clean it out which is nice. Does anyone know what this fuel pump bracket is from?
  2. ~KnuckleDuster~

    IMG 9493

    From the album: New Parts

  3. ~KnuckleDuster~

    IMG 5918

    From the album: New Parts

  4. ~KnuckleDuster~

    IMG 6213

    From the album: New Parts

  5. ~KnuckleDuster~

    IMG 6210

    From the album: New Parts

  6. ~KnuckleDuster~

    IMG 9485

    From the album: New Parts

  7. ~KnuckleDuster~

    IMG 1929

    From the album: For Sale

  8. ~KnuckleDuster~

    image2

    From the album: For Sale

  9. ~KnuckleDuster~

    image

    From the album: For Sale

  10. Picked up a Kamaeri rear strut bar in an attempt to stiffen up this old chassis. Worked well rear end feels much tighter. I attempted the Kameari front bar which was rumored to clear the top mount intake manifold on the RB but it didn't. Ill have to have one made custom or wait and see if I go the ITB route. I was on the hunt for a more functional shift knob. The old knob while looking somewhat period correct was from a Datsun 720 pickup truck and was too small in the hand for fast shifting and the hard plastic with a sweaty palm combo was just asking for mis-shifts under pressure. After much searching about I settled on the OEM knob from the last generation 240sx (S15). Perfect fit in the hand and doesn't look aftermarket. I does have an S on it for Silvia but that could be for S30?!? The thread pitch of this knob is unlike most Nissans. I had to find a M10x1.25 to M12x1.25 adapter. In the process of putting together a new video with the new header music but it's slow going..
  11. ~KnuckleDuster~

    IMG 9483

    From the album: New Parts

  12. ~KnuckleDuster~

    IMG 9477

    From the album: New Parts

  13. ~KnuckleDuster~

    IMG 4157

    From the album: For Sale

  14. ~KnuckleDuster~

    IMG 4156

    From the album: For Sale

  15. ~KnuckleDuster~

    IMG 4155

    From the album: For Sale

  16. ~KnuckleDuster~

    IMG 9469

    From the album: 73 240z

  17. ~KnuckleDuster~

    road

    From the album: 73 240z

  18. ~KnuckleDuster~

    IMG 9461

    From the album: 73 240z

  19. The previous page shows some issues I had to deal with. The ebay seller DEA Performance sells them. They're on the Australian ebay site.
  20. The car had another episode of what seemed to be running on 5 cylinders again. Now that I know what that feels like I suspected another coil pack had kicked the bucket. Check engine light was on and sure enough another coil pack died 20 miles or so after the last one. Figured the 11 year old coils were done for so ordered a whole set of OEM packs. I was considering Splitfires but heard stories of them going out quickly. For an N/A motor I'm sure the Nissan units are just fine. Figured this was a good opportunity to finally get rid of the old nasty valve covers. I was anxious to see the condition of the inside of the heads and to my surprise there was zero burnt or or sludge anywhere. It looked brand new inside. Looks good with out all that non sense on top.. All back together. I painted the Neo Sraight 6 lettering silver to match the other lettering. Test drove her with the new coil packs and shes feeling better than ever. Sounding nice and healthy too!
×
×
  • Create New...