Jump to content
HybridZ

ORANGEZ

Members
  • Posts

    82
  • Joined

  • Last visited

Posts posted by ORANGEZ

  1. I wanna change out my stock TEMP and Oil Pressure guages on my 72 Z.

    I think there faulty anyways they bounce when car is on. Ive seen autometer guages in other Z's what size fits in the 72 z? Are they relatively easy to replace? Plug and play or do I have to run wires? Any info would help

  2. Ok switched out carbs with a good working set that ran totally fine on my bros 240z. Ok car runs sweet with perfect idle. Problem: Engine still sputters for 10-15 seconds when I turn it off. Then finally shuts off. Where should i start to troubleshoot next?

  3. i was removing my SU'S and installing some webbers when the gasket on the spacers broke. Can I just use some cut a gasket material ? If not wheres a place where i can get a gasket? I cant find on motorsports.

  4. 72 Datsun with a rebuilt swapped motor. Problem: Idles high when car is on and when ignition is turned off the car sputters for 2 mins then turns off. Cranks but doesnt start when turned on. Takes a few times of cranking then turns on. I was told by owner when purchased car first carb nearest to radiator needs rebuild. Has anyone else had this problem? Ive driven car around drives fine other than 2 problems stated above.

  5. How does it drive? Get some videos for us to see! Thats amazing cool gas saver project:icon14:

     

     

     

     

    I also think my tires will act like a "mechanical fuse" by loosing traction. If my motor is making 250ft/lbs but the tires break loose at anything over 175...then the transmission never "sees" more than 175. Right? I've heard it is good up until 250 or so. I've got a spare 5spd sitting here that I guess I'll hold onto for now, just in case.
  6. my 72 z was running fine after i cleaned out fuel lines and changed fuel pump. Ran great till a week ago when i was driving close to empty when the car started sputtering and didnt want to accelerate anymore. I noticed my fuel filter is again filled with little rust debris. Maybe theres chunks of rust in the tank ? I'll clear out the lines this weekend to see if it works normal again but as for now im open for suggestions....... what do you think?:-|

×
×
  • Create New...