Jump to content
HybridZ

DirtySouthZ

Members
  • Posts

    9
  • Joined

  • Last visited

About DirtySouthZ

  • Birthday 06/11/1975

Profile Information

  • Gender
    Not Telling
  • Location
    Austin, Tx

DirtySouthZ's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. What exhaust manifold are you using and what size turbo? Nice work.
  2. has anyone purchased and received Gabs axles for a Q45 diff (R200)swap? If so, do you have the length measurements? I'm guessing they are not equal length?
  3. whats the greddy part number? to remove the stock oil cooler?
  4. I wish mine was that easy. That was first attempt with a good chisel for about 30 mins. or so. I'm thinking the same thing w/ heat on the block to expand and help losen it. It seems some what seized up in there. Should I use anit-seize when i reinstall in the rear location? Thank you.
  5. Any tips for removing and relocating RB25DET dipstick to rear slump location???? I have the brass plug out, but having a trouble getting the dipstick out of the front slump hole w/o damage to stick. Should I heat the outside of the block? I did search this topic and saw that STONY and others run two sticks, but I'm hoping to reuse the orginal. Thank you to all for any suggestions!
  6. What injectors are u guys running? if i want 500 on pump from 78 S30 w /98 R33 RB25DET w/ top mount T60, frontmount IC and Greddy. Intake Man. on stock long block ...not yet running... Also what are u doing for EMS? I have stock computer and harness but would like to run top feed low imp. GTR injestors, so what do i need? GTR inject. harness, top feed LOw imd. injectors, w/ what size nozzle and flow? does any have wiring diagram to GTR inj harness? or have a harness to sell? And what clutches are u guys running? for R33 RB25DET tranny..stock is pull type i think... ATS, EX, ORC has push type conversion so we can run GTR clutches??
  7. Can i remove the thin wires and black stuff on my rear window somehow w/o damaging it? if so, how?? not using stock chassis wiring harness.. 78'280
  8. Whats the best source for axles? Speedway? 12.437 ds &12.937ps? Will these lengths work w/ Ross's/ MM CF adp.? Any other source for the CF adpter? Is there an aftermarket R230 thats fully locked? maybe clutch type? not VLSD? how can i tell when my VLSD is worn out? Anyone have 4.08 or 4.11 ring and pinion from Z32TT i'm thinking, & want to sell?
×
×
  • Create New...