soullessjdog
-
Posts
60 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Everything posted by soullessjdog
-
Hey I know it has been a long time but on that drive shaft mounted speed sensor can someone shed some light on were I can get one and how it is hooked to a speedometer thanks.
-
are you using 240z sway bar up front or 240sx sway bar?
-
Did you ever find the Z31 rotors and calipers you were looking for? Let me know I may be able to help. Roger
-
Well there is no speed sensor in the transmission, and I don't know how I could have a speedo so I was thinking adapting it to a older trans to have a speed sensor.
-
Ok I have been searching for almost a week and can not find out if there is an adapter to mate a rb transmission, or vg30dett transmission to a vq35de engine. If any one knows of one it would be much appreciated.
-
I was reading on here that the 87-89 turbo hubs fit since a member is running z33 rotors with z32 calipers on his s30.
-
Is this an easy swap or are there alot of machining to do? Is there a link for this swap? Thanks for info.-----Roger
-
Im looking to buy all four wheel hubs off a 87-89 300zx turbo. they are the round hubs not pentagon. there for my s30 five lug and brake upgrade.
-
From the album: The car
-
-
-
From the album: The car
-
Ok i have searched and cant seem to find how to install and wire my tec2 system? Eny help would be nice a link to an install or someting I bought mine used and there was no instructions.
-
wheel size ?s
soullessjdog replied to soullessjdog's topic in Brakes, Wheels, Suspension and Chassis
The zx did not have flares there a positive offset and come with some 1 inch spacers im picking them up tommorow so if i dont like them i will put them up for sale here there vintage nissan stuff the long wheel studs and spacers. They had the car in the 80s and then it broke and they just salvaged things off of it. -
Ok guys i know that most of you run 7 or 8 inch wide tires but i have a line on some nice wheels that were on a 280zx there 16x10s. I have a 74 260z so just wondering if thoughs wheels are going to fit in the standered wheel wells and still be able to turn the wheel with out rubbing. i dont want to do fender flares.
-
hey guys i have been wondering what pad options there are for the 79-84 toyota calipers. i did search and i saw that kvr, poterfields, and gran sports which i cant find. I heard that u can mod z32 pads to work with the calipers and thats my main ?. and if not what would be a good pad for street and race.
-
How do I delete the this thread I got my answer from the guyim buying pistion from.
-
I have been looking but cant find my answer are L28e and L28et rods forged and how much horsepower can they handle?
-
Im looking to build a n/a L28 and im looking for a good set of triple carbs 44 to 50mm with or with out intake manifold.
-
ok thanks guys i was going to get je pistions with an 88mm bore i thought about a stroker but cant find a vd crank.
-
ok thats good just wanted to no if that block would hold for a turbo build it has dished pistons im going to forge the bottom end thats y i asked if it would be suitable to hold around 350-400 horsepower thats all. thanks guys for the imput it is greatly appreciated.
-
but the 77 block is an f54 block though right?
-
I have an 83 L28et engine but want a spare block to do work on i was wondering would an L28 from a 76-78 280z be suitable for a turbo engine build with a p90a head put on it I am just curious because a spare engine block to do work on would be nice and theres a 77 in a junkyard around me with no head i can get cheap.
-
I broke my original r180 diff in my 260z witch has the slide in splines that go into the diff i pulled a diff out of a 240z in a junkyard and it has bolt on halfshafts now can i take off the center bolt on the 240z diff witch holds the 4 bolt flange and be able to use my slide in splines. really its a ? about on the 240z diff is it like an adapter plate?
-
I bought a set of eibach springs and they said 1" lowering but when I put them on it lowered the car 2" to 2-1/2 inches enyone else have this problem it looks good I now have tire rubbing the fenders now.
-
suspension tech sway bars.
soullessjdog replied to soullessjdog's topic in Brakes, Wheels, Suspension and Chassis
Thanks alot john u were a big help now all i have to do is get paid and order.