Jump to content
HybridZ

german903

Members
  • Posts

    16
  • Joined

  • Last visited

About german903

  • Birthday 05/11/1982

german903's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. german903

    BMW Seats

    I have a E36 M3 seat bolt into my 73 240z! one thing which is very important that I would like to let you know! if you just bolt it into your Z with the original seat mount from the Bimmer your driving position will shift to the left 2-3 inches! + you will need to buy the seat belt for the bimmer unless you got a racing harness or you will have no place to install the original seat belt.
  2. there will be 2 problem come up with the m3 seat! 1 it raise 2-3 inches up, killing a lot of head room 2 it's like 1-1'5 inches shift to the right hand side so you are not actually sitting right at the middle to the steering wheel It looks really good from outside, however in order make everything right you will need to redo the base from the seat which i think is not worth to go through all these for it!
  3. there will be 2 problem come up with the m3 seat! 1 it raise 2-3 inches up, killing a lot of head room 2 it's like 1-1'5 inches shift to the right hand side so you are not actually sitting right at the middle to the steering wheel It looks really good from outside, however in order make everything right you will need to redo the base from the seat which i think is not worth to go through all these for it!
  4. looking for a Cromodora CD 86 6,5JKx14 | 4x114,3 either 1 piece or a set really appreciate the help since I got 1 of them damaged last week in a unfix able condition it's like taking a piece of skin off my body if you got one or friend of you got one please please let me know I am from Daly City , San Francisco Bay Area will pay for shipping or come meet you up thanks again
  5. I am looking for a shop to do a nice clean vq35 complete swap for my 73 240z if anyone know there are any good one near by the San Francisco Bay Area? I used to live at south cal and been to the shop at Temecula CA they seems very pro in doing the rb's swap and have a vq35 project on going but I don't have a chance to see it done since I moved up to San Francisco and it's a kind of hurt to drive 8 hours down there so if anyone know of any good shop please let me know
  6. this is what I mean about carbon fiber everything. and how's you guys opinion about making a hood and fender in one piece by carbon fiber? if there are any shop would do the job in the san francisco bay area like the one in the link below? thanks a lot http://www.bornrich.org/entry/lotus-elise-all-decked-in-carbon-fiber/
  7. since carbon fiber need a compresser and a giant over I am thinking parting out my fender in front use it as a negative mode and make myself one by fiber glass. but I have no exp in doing this. Would like to know if this will work? or does it reduce some weight instead of the original fender and hood ? or did anyone try to make a one piece fender and hood by fiber glass project before would love to hear from you guys thanks for any opinion
  8. hi I do really want to know where did you get your front bumper from? it looks really great and it would be great if I could get one in my baby too
  9. I am jsut got a new idea today ! Since I am planning to swap the engine for my baby so should I just leave it as is and get the new wire from the new engine? But the only thing is I am going to DMV soon would they check on the light when I change my title ?????
  10. The problem was started with the tail light fuse. when I replace the fuse for the tail light I found the socket for the tail light is kind of burning all the plastice around is burnded off but right after I put the fuse on it it's working.Then my head light is gone. so I bought all the fuse and replace everything inside the fuse panel. Right after that all the light is not even on at all. And I am really having NO idea how to fix it. Is there anyone live near by daily city could come help me or any shop reccomaded. By the way should I replace all the wire in my car? anyone have anyidea of how much would it be? 1973 240z
  11. The problem was started with the tail light fuse. when I replace the fuse for the tail light I found the socket for the tail light is kind of burning all the plastice around is burnded off but right after I put the fuse on it it's working.Then my head light is gone. so I bought all the fuse and replace everything inside the fuse panel. Right after that all the light is not even on at all. And I am really having NO idea how to fix it. Is there anyone live near by daily city could come help me or any shop reccomaded. By the way should I replace all the wire in my car? anyone have anyidea of how much would it be? 1973 240z
  12. I saw some really amazing work from you guys e.g. the 350z dashboard into the 240z and also some silvia's too but did anyone tried the one from the R32 or R33? I know they are right hand drive but just hope to see someone els job with the GTR dash board on it. by the way does anyone know if there are any ppl making the custom carbonfiber or fiberglass parts? (I saw a RX-7 with all carbonfiber body parts and the guy told me it was custome made from a shop at LA.)I just wanna have my fender trunk hood and both door. (best to be around los angeles or san deigo ) really try to cut down the weight to 1000kg to get a better horse to weight ratio than the new GT-R. Or do you guys have better idea for cutting down the weight ? thanks guys
  13. so nice anymore pic of the dash specialy the connection between winsheld and also the end that connect to the door
×
×
  • Create New...