dsalni

Hello all, I know similar fuel tank pressure issues have been covered to a degree before. I haven't been able to find a solution to my specific issue, but if you know of a post that covers it, please do share. My setup: '78 280z converted to triple phh44's, Carter fuel pump, OER fuel rail (deal end, not flow through). Removed charcoal canister, vent line open inside the engine bay. The line isn't clogged. I just had my carbs rebuilt and also changed out the fuel delievery to the OER fuel rail. I left the fuel return line open during the short test run. What I'm experiencing is after the short drive, I notice there's excessive pressure in the fuel tank. I notice fuel squeezing through the banjo fittings on each carb, as well as shooting out of the disconnected fuel return line. Once I opened the gas cap (new, vented), there was a rush of fuel coming out of the tank. Currently I'm going through the vent lines that go to the gas vapor expansion tank in the C pillar, but so far haven't found any clogs.. Any ideas / advise would be greatly appreciated!

hey guys, wanted to update you on the status of this pre-order. My screen printing shop has received all but one size of all the hoodies, and that unfortunately has caused a small delay in production. I should have accounted for this delay and for that I apologize. If it means anything, I will be including 1 "Home Built" and 1 "Under Construction" sticker with each order! thank you for your support, patience and understanding!

so here's a non-circle version.

Thanks for the support, Takashi!!

hahaha fixed. added 3X option.

So with fall right around the corner, I'm preparing another small, and maybe final batch of Mikuni/Solex carb hoodies. This is a very small batch, with only 5 available in each size. The hoodies are made by Gildan, here are the specs: 8.0-ounce, 50/50 cotton/poly; no pill Air Jet Spun Yarn Double-needle stitching Double-lined hood with dyed-to-match drawcord Set-in sleeves Rib knit cuffs and waistband with spandex Front pouch pocket The hoodies will be ready to ship the second week of September. Typical price is $30, pre-order group buy price is $24.99! You can pre-order via hybrid-z or directly through the store.

adding some related artwork:

<--- more info on first page. and for you Porsche fans

Couple shots of the short nose, narrow body:

Not sure if i'm going to do a whole run. If you're interested in something custom, pm me and we can chat about some options.

Nice!!

got it! will update you with tracking as soon as it becomes available. thanks!

you should've gotten a pm from me in regards to that 5 days ago. short nose / narrow body prints are already shipping.

hey Arif, glad you like it! Post up some pics! This particular illustration is limited to 30 pieces, so once the 30 are gone, there will be no re-prints. thanks again!!