cyris3d

I have a rb26 and a feww goodies. cyris@cox.net

the clip shell went to the crusher, sorry

so coilovers, ZG flares, and a half inch spacer should do it.

anyone?

thanks Bob H for the comments and support. I will look for the stock manifolds.. find someone to pick up my motor and acc. and they are yours!!!... if ya cant. ill give em to ya anyways. Just pay for shipping. Its a 32 trwebb26- does the emanage eliminate the MAfs on the RB26? The VPC does, which is a very helpful tool when making nice sums of power. No pesky mafs in the way, or upgrading ect, Seen many cars make great power on the VPC. A local guy here in town set the US 7MGTE power record(900+) with a VPC,SAFC combo. Along with many DSM guys making huge power with the same combo.

motor sets, which come with the awd tranny are going from 3500-5000, Mine has a HkS to4R turbo and wastegate, $5,895 for a kit,(which includes manifold) so minus 3000 give or take, so your at 2000 for the turbo with is 700hp rated, http://www.titanmotorsports.com/hkst0turkitm.html A brand new HKS VPC, $500-1000 and if some one get me my asking price ill throw in a 24x13x4inch Intercooler

it came with a AWD tranny.. but i tossed it.. im sure i can get ahold of a tranny for you.. for a decent price.

I was tryin to fit my 15x9/5inch BS, on my 280z.. but they were no were close to fitting. This is with stock suspension, will a coilover setup fix this?

check it out here.. if you want any more pics, i can take some if ya want http://forums.hybridz.org/showthread.php?t=115875

im selling mine.

Im pretty new to custom suspension.. Ive only dealt with straight bolt on full coilover setups on my s13. Now doing it this way looks like a feasible solution to a full coilover setup. Then just take the camber plate from the s13 coilover set up and weldit to the strut tower like you would any other camber plate for the Zcar. Seems like a great Idea.. but im having a hard time with cutting up $1300 Stance coilovers. The possibility of cutting them too short or wrong would make me sick to my stomach. So how would one go about making sure that the right amount is cut off the lower housing so the fit would be just right? If you took an extra set of stock Z suspension and made you new custom coilovers the same length as the stocks, it should fit just right? I would end up looking like the Spirit garage setup

This is a really good swap idea.. do you think that it will werk the same way on a 280z.

motor doesnt come with stock turbos. but I still have the manifolds and upper piping. Everything else is there, ie. the Ac comp, PS comp. But it does come with a HKS T04r turbo inplace of the stock twins im in vegas

Selling my RB26dett motor and acc. I was going to put this in my s13 but i have deceided on a different route. RB26dett motor - pulled from 55,000kilometer clip Motor is poweder coated BLue Complete Engine Harness and ECu New intake manifold gaskets HKS VPC(eliminates MAFS) HKS TO4r Turbo HKS 40mm waste gate $4500 email Cyirs at cox.net

NHRA SPort compact will be here on sept 9th if your in town

im intrested in mounts for this swap.. any ETA on your guy making them?

i live in vegas.. i just sold my Rb 240sx.. and werking on a rb26 240z.. are you planning on running your car here?

well im starting a build up of a NHRA street class car... having a 240sx with a rb25det in it.. that was the way i was origanly gonna go.. put my GTR motor into a 240sx.... but i just picked up a beautiful 76 280z... gettin the motor in and what not is no big deal.... the problem i am having is figuring what im going to do about the rear end.. being that its a NHRA Steet class.. its gotta use a Nissan Rear.. no cutting, no striaght axel ect... so im thinkn of using a GTR LSD but not sure if the Axels will fit... i know they are plenty strong.... any one know if the GTR rear will fit? and second.. im not sure if a 26x10.5 ET street will fit under the stock fender.... any one run this setup of tire? thanx for the help.. ps allready searched.. couldnt find a clear cut answer

well i bought some 15x9 inch bogart racing rims.. with a 7 inch backspace for my 90 240sx.. but i decided to scrap that project.. and im puting my rb26 into my 76 280z question is.. will the rims and some 26x10.5 Mts fit under the 280z wheel

any one know what bumper this is?

s13 black top.. $1600shipped.. sales@mitsuparts.net

yes.. ive gotten mine.. its perfect and clean.. hes a good guy.. yea hes a little hard to get ahold of sometimes.. they are always super bizy

kendall from mitsuparts?? if so then yes same guy.. hes a good guy.. let him know Justin sent ya

i can get you a complete motor set like mine(the ones in the pics) for $3600 shipped.. any where in the lower 48 states COMPLETE -justin