kam

I got a motor from a rolled 280 with cam, header and a 250 hp shot of nitrous kit on it. The guy I got it from never used it. Will this motor hold up to that much spray or would I just have to pull it out the first time I try to spray.

It was stored in my brothers big new shop.Heat/cool no leaks in roof, its nicer than my house.

It runs great at idle. Only at 3 to 5,000 r.p.m. The knock sounds like its on the bottom end cylinder #1 or #2. I pulled the valve cover and it looked good, but I drained the oil and there was metal shavings and I think it's piston skirt aluminum chunks. So I think my motor is junk. I ran great befor storage, but why would it start now?

Thanks the adjustment worked after a few tries.

When I turn off my car the motor tries to keep running an sounds hoorible. My dad says its dieslising. It will run with the car off for 30-60 seconds or untill I stall it out, e-brake and dump the clutch. How could I fix this?

CHEAPEST WAY-My uncle used high temp black paint on his truck.It looks good............from realy far away

Lets see, keg mounted for back seat, murdered out(black inside&out), and the three 15inch subs with 5 amps and 3 batteries

my car maxed out the speedo, all the way around, in the desert in nevada. It has a carburated 383 sbc, 700r4 with 3000rpm stall, r-200 with 3.90 gears ..... my speedo may be off ...... Its still fast

my car maxed out the speedo, all the way around, in the desert in nevada. It has a carburated 383 sbc, 700r4 with 3000rpm stall, r-200 with 3.90 gears ..... my speedo may be off ...... Its still fast

changed it before I started it with royal purple.

My straight 6 started to knock when I took the car out off storage. Iput new gas and a battery in it and it started after a few cranks. Gave it some gas and it started to knock at 3,000 r.p.m. and would stop at 5,000. What would do that to my motor? It ran great befor and it was only stored for 4 months. I don't want to put a nother motor in because this one hardly has 4,000 miles on it. Is there a way to fix it with out a rebuild? thanks

do you know of any good body shops in nor cal.

I have a z280 and i want it to look cleaner, smother, faster. It still has the huge old bumpers on that I want off. Also the trim & emblems to be shaved. the old owner had it painted and their are peels, run. all in all looks like crap up close. Wifey gave me 4,500 for make over thanks