Jump to content
HybridZ

Jax

Members
  • Posts

    10
  • Joined

  • Last visited

About Jax

  • Birthday 02/17/1980

Jax's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. If you are not able to get a adapter plate, you can contact mazworks, they may able to help you...
  2. I had the same problem, when we install the z32 tranny, none of the gears would go in. We drop the tranny back put in the Z32 collar with the Z32 fork and we had to fab a longer slave cilinder pin. Put it all together and it work all right, it even pushed the car to a new e.t of 12.55 :). If you continue with the same problem you might want to try the collar from a KA24 it is even longer than the L28 or the Z32. But with the above mods should be fine..
  3. I had to modified mine in order to fit it, without hitting the chassis
  4. Guys, so it is confirmed that the bolt pattern for the Z32 and Z31 are the same right ????
  5. Hello, I was wondering if this plate can be used with the Z31 transmission the FS5R30A....... Are the bolt pattern the same ????
  6. Hahaha, That is right, well the vehicle is a Hyundai Stellar 4 door, so it is a pretty heavy vehicle, even so the L28 was capable to push it at 12.89 e.t on the quarter mile. But this is the limit of the L28 tranny, I really need to swap this Z32 tranny under the vehicle.
  7. Gents, I have purchased the adaptor from 240hooke, I have machined and install the adapter. My issue is that I can not use the Z32 stock shifter, because I have my L28 in a shorther vechicle, this means that I have to use the shifter that you guys have been mentioning in the forum. The one that goes right on top of the black cover. I have order a shifter from courtesy parts, but the shifter cover plate and the SS shifter guide plate that goes into the tranny does not fit. I am really stuck here, can you help me and advice which shiter should I use, or where I can buy the right shifter to work on the Z32 tranny ?????
  8. Guys, Can you take a look at this link ??? http://www.courtesyparts.com/pathfinder-r50-1996-2004/genuine-nissan-parts/power-train/328-transmission-shift-control/-c-4700_4701_4769_4786.html This means that I will need to purchase all this tiny stuff and linkage for the shifter to work right from the 2WD 95-99??? This includes numbers 32844M and all the bolts & washers to have the shifter from the pathfinder work on the Z32 tranny right ??
  9. So, what you are saying is that I can use the pathfinder shifter on the Z32 transmission ?? and it will be isntalled in the black cover plate????
  10. Guys, I am doing the Z32 tranny on my L28 engine, but the vehicle that engine is in is not a 280 ZX , it is in a Hyndai Stellar drag vehicle so comfort is not important, I have to relocated the shifter to be moved forward because of the Z32 tranny transmission dimensions. Do you know of any options to moved the Z32 shifter forward ?? Or use any other type of shifter to have it moved forward ????? Regards.
×
×
  • Create New...