Jump to content
HybridZ

bodywerx

Members
  • Posts

    14
  • Joined

  • Last visited

Everything posted by bodywerx

  1. Hi guys, I am tring to tune my engine. My 17 engine was replaced with a 78 280 engine with a triple Weber carb setup. I know 1 of the 3 are out of sync. what kind of tool am I looking for? Can someone point me in the right direction. Thanks Dave Jones www.bodywerx.net
  2. There is not enough with only 2 doors, you need at least 1.5 maxima doors to finish 1 side. You do however have to adjust the door strikers to use this wheather stripping. I installed it yesterday.
  3. I stripped a 96 Maxima, and the weatherstripping is IDENTICAL for the doors. I used all 4 doors, more than enough for my 240. I also used a Saturn weatherstripping for the hatch, profile is very thick, but closes with a slam, and the hatch is still even with the body. I will post some pics later today.
  4. Looks Awesome, any updates?
  5. Nice hood but that is not what I am looking for thanks. This is the specific one.
  6. I am looking for ideas please..... I want to make the car look custom for that era.
  7. some suggestion, move the tail lights out < > towards the fenders for the stock look and then a wider panel inbetween the the lights. That will look "STOCKISH"
  8. O.k. I know my way around cars fairly good, but I have an issue. I am tring to get a saftey on the car, but the signals won't work. I can not get my right side front flasher to work. The left side works no problem, the park lights all work, the 4ways work, dim, but work. I have checked all the wiring back to the harness and it all looks o.k. I pull down the lever and the left is flashing, I hear the flasher clicking, the dash light is on. I lift up nothin! No sound, lights etc... Is there any way to bypass the column lever to check to see if it is that? HELP PLEASE......
  9. I have a vent on the valve cover. I will look to see if I can hook up the vent to the intake somewhere, again, it is a 280 engine with a triple weber. This is all new to me, thanks.
  10. so hanging down against the header is bad then right?
  11. Hi guys, I just got a "new to me" 71 240Z from my father-in-law. It had an engine swap about 2 years ago to a 2.8L 280z triple weber carb setup. I was looking over things on the weekend and noticed a few things, that he did not. On the drivers side under the 1st weber there is a hose coming off the block, looks like a "L" shape, going nowhere. It is not effecting the car in any way that I know of..... Any suggestions on what it is? I will try and take pics if this is not clear?
  12. bodywerx

    Our 71 240Z

×
×
  • Create New...