Jump to content
HybridZ

Stevespeed

Members
  • Posts

    7
  • Joined

  • Last visited

About Stevespeed

  • Birthday 06/30/1987

Contact Methods

  • AIM
    stsspeed100
  • Website URL
    http://www.dkmotorsports.net

Stevespeed's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. Oh yeah the ShitrO! you removed its Knock sensor otherwise I would have just check that in your garage, I could have check the bare block... on the ground next to it as well.
  2. I will post up a picture as soon as mine arrives, I dont really have a good shot of it as of right now
  3. Evan's right The RB's knock sensor is not exactly what i need, its more along the lines of the clips to make the harness per Evan's genius recommends. I sourced a harness out of japan from an RB25DET Neo that I can make work quiet well, but I still want to know what crosses to an American part number. Ill take some look through the US Catalog of Fast like you recommended, I have the JAP and EUR catalogs and possibly AUS loaded currently.
  4. I have been doing the wiring for my RB25, and I decided to just label everything in the harness, at first I couldnt find anything for the knock sensors, and did not think much of it. Well I did the biggest mistake any RB20/25/26/30 purchaser could ever do, bought an extremely incomplete swap for cheap. I am missing the knock sensor harness, upon talking to Evan, he helped me work out that I could build the harness if I had the connectors, so for the next 2 days straight I went trudging through the local junkyards to find a car with similiar knock sensors. Upon having 0 luck in the pick and pull yards around my house and checking through about 30 Nissan Maxima's, Alitmas, Sentra's, 200sx's, 240sx's and 240/260/280z's I came up with nothing. Then I turned to Nissan Fast and looked up the Knock Sensor's part number, which seemed to only cross with the 20/25/26 and no other engine produced by Nissan. So does anyone know a cross able part number for a connector? or of a place where I could source a set of clips and just build the harness? Thank you all -Steve
  5. I got one for you in michigan with no trans, pearl white, please email me for more information, it would be free. It is also missing a few other things such as the glass, and brakes and rear uprights. Stevespeed@gmail.com Steve
  6. I would also have to agree that it is most likely an electrical issue, have you checked the basic things such as dirty battery terminals? I had a similar issue in my SX when it would not idle for anything and several other similar issues.
  7. That is hysterical! I give the guy some points for creativity at the least, it is very evident that there is some redneck/hill billy in that man's blood.
  8. Like an aftermarket koyo or a Mishmoto, which runs only about 225 bucks and is HUGE, not to mention shiny and pretty, its great for an engine bay dress up too. Great find though out of the Junkyard, I used to do the same thing with some local yards that are pick and pull yourself so they would just let us walk through and find whatever we wanted, it was great for finding gems like this that can save lots of $$ in a swap. And not to mention its always interesting what you find in junkyards
×
×
  • Create New...