Jaconense777

Hello guys again, Question number 1: can I change the brake vacuum reservoir hoses without compromising air getting in to the brakes fluids? It has edelbrock 60739 heads,1406 carb, performer 2101 manifold for reference. Hello guys again, Question number 1: can I change the brake vacuum reservoir hoses without compromising air getting in to the brakes fluids? It has edelbrock 60739 heads,1406 carb, performer 2101 manifold for reference. Question 2. I have a problem with my car it cranks but it doesn’t start. it has new ngk spark plugs (got them at Amazon) it was backfiring and saw some smoke coming out by the headers so I changed the valves covers and headers gaskets, new battery, the fuel pump is a red Holley and it sounds that it’s working (as it’s very loud) I cleaned the fuel hoses with air pressure . used starting fluid and it just cranks but it doesn’t start. I was told that it could be the started but as it cranks I searched up and found out that if it cranks the starter works.what ever it’s going on it’s drying out the battery, I had some alarm expert lol from a local alarm shop near my place and paid a lot because they had to remove the old alarm system and put a new one, the old one stopped working and i couldn’t turn it off, and it was working fine before, even he broke my steering wheel column cover. but all this thing happened when all the crazy stuff about the pandemic and couldn’t get in touch with them, so I am screwed there. Anyway I narrow things down, The fuel pump is loud and there is fuel in the carburetor, I bought a performance tool w86553 Ignition Tester and there’s no power on the spark plug tester, I checked on 3 spark plug cables, so I was looking at the hatch connector and shows some rust I cleaned but still doesn’t work, Should I buy a new distributor ? If so which one do you recommend? The car was turning on without a problem, I twisted the distributor a little to the left (counterclockwise) and turned back as I saw some antifreeze by the left rear bolt next to the distributor so I don’t know if that could be one of the reasons. I didn’t know that affects the timing.I am categorized as disabled, and been working on my Z, Had to deal with cancer and had something like a stroke and had to remember or relearn some stuff, spend over a year down and 6 months in the hospital so no much $ and my oldest son is helping me with the hard work.c found the spark plugs about $5 bucks cheaper on amazon and that’s why I bought them In case some one ask why I bought them on Amazon 😅lol Do you guy have any idea what it could be?

Hello guys again, Question number 1: can I change the brake vacuum reservoir hoses without compromising air getting in to the brakes fluids? It has edelbrock 60739 heads,1406 carb, performer 2101 manifold for reference. Question 2. I have a problem with my car it cranks but it doesn’t start. it has new ngk spark plugs (got them at Amazon) it was backfiring and saw some smoke coming out by the headers so I changed the valves covers and headers gaskets, new battery, the fuel pump is a red Holley and it sounds that it’s working (as it’s very loud) I cleaned the fuel hoses with air pressure . used starting fluid and it just cranks but it doesn’t start. I was told that it could be the started but as it cranks I searched up and found out that if it cranks the starter works.what ever it’s going on it’s drying out the battery, I had some alarm expert lol from a local alarm shop near my place and paid a lot because they had to remove the old alarm system and put a new one, the old one stopped working and i couldn’t turn it off, and it was working fine before, even he broke my steering wheel column cover. but all this thing happened when all the crazy stuff about the pandemic and couldn’t get in touch with them, so I am screwed there. Anyway I narrow things down, The fuel pump is loud and there is fuel in the carburetor, I bought a performance tool w86553 Ignition Tester and there’s no power on the spark plug tester, I checked on 3 spark plug cables, so I was looking at the hatch connector and shows some rust I cleaned but still doesn’t work, Should I buy a new distributor ? If so which one do you recommend? The car was turning on without a problem, I twisted the distributor a little to the left (counterclockwise) and turned back as I saw some antifreeze by the left rear bolt next to the distributor so I don’t know if that could be one of the reasons. I didn’t know that affects the timing.I am categorized as disabled, and been working on my Z, Had to deal with cancer and had something like a stroke and had to remember or relearn some stuff, spend over a year down and 6 months in the hospital so no much $ and my oldest son is helping me with the hard work.c found the spark plugs about $5 bucks cheaper on amazon and that’s why I bought them In case some one ask why I bought them on Amazon 😅lol Do you guy have any idea what it could be?

Hello guys, I am having a headache trying to find out all the correct information about my engine. There are other people trying to fin out by using the casting numbers by the back of the engine but looks like the number has a printing error, I know it’s a 350 5,7, but I would like to know exactly what I have. does anyone has a good idea of how can I get all the information about my engine? Year? What vehicle was originally from? Hp, etc I need parts and the auto parts always give me issues as they need the year or model of my vehicle. I can’t tell them athat I have a Datsun 1975 with a sbc lol, Any help will be appreciated. I am opening another discussion to explain the issues. Thanks for your support, we can do “diy“ because we help each other. In a Chevy forum they replied telling that this is the engine information, How do I know to what vehicle it came from, or at list a vehicle for me to use when ordering parts