BlueTurboZ

Getting ready to do the swap of my turbo motor & BW T-5 transmission into my S30 car from the zx turbo car. Looking for the tranny mount for the T-5 or any info on where I can get one fabricated. Located in Seattle WA area.

Very nice find! Looks great. Do you know any of the history - # of owners? Be careful, could be interesting driving it home if the snow on the roads is an issue ...

I recently purchased the Beck/Arnley TPS from Rock Auto. (23.89) Replaced & adjusted it correctly, it works well ...

When you washed the engine bay, you got water in the TPS, shorting the contacts that are inside. You need to blow it out with a can of compressed air, or contact cleaner. Or ... it will eventually dry out by itself. Next time - cover the TPS assembly before washing.

Brackets found & purchased from local Hybrid member

Pull the J Pipe & see if there is any oil residue inside. Then, pull the intake boot fron the turbo & feel for how much shaft play the turbo has. That should give you a good idea of the condition of the seals.

I don't think they are Rota's - but might be Konig Rewinds ...

The boost sensor connection should work fine. It is normally fed direct vacuum from the metal pipe array just below, on the side of the manifold, with a short run of hose.

For 83zx (82 -83 are the same) Looking for both rear caliper mount brackets - both L & R sides for 83zx The current ones have a frozen lower pin bolt on both brackets causing obvious problems with the rear brakes. Must be in good shape - the rubber boot part where the bolt's screw in are free & moving - 2 on each bracket.