heres the pics i promised with pricing let me know what you want or if you have questions
strut tower cover $20 each. other side is in the same condition, faded but in alright shape for its age
interior panel. needs to be recovered with vinyl. $40
passenger side cover nice shape. needs rubber corner put back in place i think if it was heated with a heat gun it would help stretch it out back to where it should be. you can see where its loose in the pick top right edge
CORNER MARKER SET $15 both in good shape no clue if bulbs are good
rear corner marker set $15 no clue if bulbs are good
drivers side kick panel $40
passenger side pillar cover $30 faded but with dye it should be fine
under dash vent pipe $15
lower dash cover $30 no clue if bulb is good
passenger side kick panel cracked slightly $20
drivers side inner fender well headlight bucket $15 cracked by screw hole
passenger side is in good shape $25
lower dash cover $15
dash vent piece, in good shape $20
lower dash cover $30 no clue if bulb is good
cover $10 each ,missing one stud other one is in the same condition (missing a stud also)
vent piece $25
cover $15 each. other side is in the same shape
glove box liner $20
drivers side inner panel $90 each ,passenger side is in same condition both are in good shape. dirty in pic some slight fadeing near windows
drivers side pillar cover $30
cover for rear side window mechanizm $10 other side is in the same condition
i believe this is one of the covers that goes on the vertical part of the door opening, would be right behind your sholder towards the door. its in decent shape but is sun bleached. dye should bring it back to life $15 for drivers $10 for passenger side (missing tab)
front bumper complete with turn signals, bumper cover, shocks etc few scratches but otherwise in nice shape $200
blower box looks to be in good shape and is complete. $175
stock l28 complete with mechanical parts, turns over with wrench electricals are no good at all, wiring is melted from battery being put in backwards harness was cut when i removed. right now it is sitting in the complete crossmember. $500 for the motor and tranny together. $250 for tranny if seperated. $375 for motor if seperated.
stock 1982 n/a 5spd tranny, i was told it was rebuilt. i cannot verify this however this is what the previous owner told me. seems to shif through gears fine $250 if seperated from motor otherwise see pricing above for set
rear diff right now is complete on crossmember with cv axles. for differential and cv driveshafts i'm looking to get $400 looks like diff needs an new seal on the right side.bushing is shot
overflow tank $35
ofcourse all prices are negotiable. let me know what you think or want and i"ll get back to you