Jeff
-
Posts
421 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by Jeff
-
-
Here is a link to a thread back in October where I detailed how I removed my undercoating. http://www.hybridz.org/phpBB2/viewtopic.php?t=11281&highlight=
-
Looking good Rick.
It is going to be very cool to have full tube frame with a Corvette suspension and of course brakes! Don't forget I will be in Gainesville tommorow and will give you a call. -
Your a very lucky guy Mike. A reckless driving ticket sucks big time. It is a mandatory court appearance where you are at the mercy of whatever judge you get. Keep that boost down and be a good fellow
-
Sorry to hear that it let go Scottie. That's awesome that you were able to limp it home though. Definetly sounds like the spider gears went on you. I will check with a friend who closed his Corvette shop not too long ago and see if he has a line on any Dana 36 chunks.
-
Dan, I was having the same problem and I went in and deleted all my temporary internet files including all the cookies and it seems to have fixed it. ZROSSA you might try it as well. Be sure to delete all the cookies because that is the only thing that worked for me. Unfortuneatly you will loose all of your automatic log ins for all the sites you might visit.
-
Nice kill MIke
The look on his face had to be priceless. Is the rear seal on the tranny holding up this time? -
I believe the wife must have established some new guidelines for him.
-
Damn
That just looks painful. -
Kroil is the best penetrating oil that I have found. Soak them several times and even the most stubborn fastener will come loose.
-
Don said it best with regards to where these cars rust
On the body of the car.If you have the time, patience and oh yes the money it is best to strip these cars all the way down. It is the only way you will know if you have found all the rust. On the other hand if you do a good investigation into all the areas listed above chances are you will be fine. It all depends on the condition of the car you are starting with.
-
Look carefully at where the floor pans overlap at the firewall and where they join the rear section of the car. This "overlap" joint traps moisture and then they rot away.
-
That's a great site. If anyone is stupid enough to buy it then they get what they deserve.
-
No coincidences, everything happens for a reason. I was on my way home tonight and stopped to get gas before getting on the interstate. A young man approached me and indicated he had run out of gas at the top of the off ramp. He was looking for a handout and I gave him the change in my pocket, how generous of me.
He then asked me if I had a gas can and I told him sorry but no. I thought it was probably a scam until that point but I still let him walk off as I filled my car. I started thinking about this story and watched how distraut this guy was. He wasn't asking anyone else for money he was just standing there not knowing what to do. When I finished filling up I went in the station and bought a plastic gas can, all they had was the one gallon size. The guy flipped when I walked out with it. I put gas in it and gave him some cash to get home with. I profess to be a Christian but I certainly wasn't acting like it at first. Thanks for posting this Mat, I probably would not have helped him if I hadn't read this. -
Great Story!! We all seem to get in such a hurry these days, thanks for reminding me to slow down and lend a helping hand to someone in need.
-
First off, Welcome to the Board! You have found the place that can and will answer all of your questions. Every question you can imagine has been asked here and if you will use the search button you can find many of your answers. Spend an afternoon or evening searching and reading and you will be amazed at the wealth of knowlege.
To hit on a couple of your questions though. The stock 280Z rear end will hold the power of a stock LT1 just fine. They are not limited slip but the IRS launches pretty well in a straight line.
Your budget of $6-10K is a realistic one but also depends on the condition of the car you start with and if you let yourself slip into the "while I'm at it addiction" that we all seem to have.
A 12 second pass is possible with a stock LT1 but it may not be the norm. So many factors come into play like traction, track conditions and of course the driver.
Good luck and have fun with your swap.
-
O.K. well I was bored at work and was trying to figure out how many posts it takes to change your status. It looks like it goes something like this:
New Member 0 - 19 Posts
Jr. Member 20 - 49 Posts
Member 50 - 249 Posts
Sr. Member 250 - 499 Posts
Guru 500 - 999 Posts
Master 1000 - 1999 Posts
Overlord 2000 & Up
So, Pete when you reach 5000 posts does that make you a HybridZ King of the World
-
Wow that is impressive
I like the suspension too. -
Damn that was fast!! Awesome job and I'll see you on Saturday.
-
I don't see any 16's or 17's on the closeout listing. Check it out http://www.tirerack.com/tires/Sizes.jsp?make=Yokohama&model=AVS+Intermediate
-
The only thing is how are you going to look down on the scale with the hood infront of you while your holding it.
Great mental image. LMAO
-
Burn the midnight oil & bust some knuckles!! Looking forward to seeing you in the caravan on Saturday.
On a serious note, I know it's a tall order and if the car doesn't make it I hope you will still come and have some fun.
-
The site is now in GMT and you need to go into your profile and set it for GMT-5 for EST or GMT-6 for Central Time Zone. It will still display in military time so you have to get used to that.
-
There will be quite a bit of body and paint work necessary when you remove the drip rails. You would then have to deal with the issue of trying to match your paint. The paint looks great on your car and I wouldn't risk it.
You can spray the chrome and stainless trim but the powder coating will give a much better appearance and will certainly last longer. You might get a piece of trim from the junk yard to experiment with so you can see for yourself.
-
I haven't bought anything from you yet Ross but I'm glad to see you are going to pick up where Mike left off. CV adapters, brakes and adjustable control arms are in my future so I'm sure we'll talk.
It is going to be very cool to have full tube frame with a Corvette suspension and of course brakes! Don't forget I will be in Gainesville tommorow and will give you a call.
That just looks painful.
He then asked me if I had a gas can and I told him sorry but no. I thought it was probably a scam until that point but I still let him walk off as I filled my car. I started thinking about this story and watched how distraut this guy was. He wasn't asking anyone else for money he was just standing there not knowing what to do. When I finished filling up I went in the station and bought a plastic gas can, all they had was the one gallon size. The guy flipped when I walked out with it. I put gas in it and gave him some cash to get home with. I profess to be a Christian but I certainly wasn't acting like it at first. Thanks for posting this Mat, I probably would not have helped him if I hadn't read this.
Anyone Here Build/Repair Auto trannis For A Living?
in Drivetrain
Posted
JW Performance is a great shop and have been in business for many years. They built a Turbo 400 for my GTO back in 1979. The car only had 3:23 gears and that tranny would still break the tires loose going into third gear.